Siser EasyWeed™ STRETCH 15" x 12" Sheet (14.75" actual size)
HOW TO APPLY
|Recommended Accessories & Care|
|EasyWeed Stretch Applies to||Recommended Accessories||Laundering|
Heat Transfer Cover Sheet
|Wait 24 hours before 1st wash|
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean
|Application instructions (home iron)||Application Instructions (heat press)|
|1.Set iron dial between Cotton and Linen.|
2.Cover design with Kraft paper or non-stick cover sheet.
3.Place on flat, hard surface (ironing board not recommended).
4.Press iron with medium/firm pressure (do not slide iron).
5.Press each section of design for 10-15 seconds.
6.If areas of design lift after application, replace cover
sheet and re-press for 5-10 seconds.
7.Peel carrier hot or cold
|1.Cut in reverse.|
2.Weed excess material.
3.Preheat garment for 2-3 seconds.
4.Apply design at 305°F/150°C.
5.Use medium pressure for 15 seconds.
6.Peel carrier hot or cold.
After running several tests, we've found that increasing the temperature to 320 and dwell time to 20 seconds with firm pressure
helps tremendously during the application process
|Cricut®||Silhouette Cameo||Scan N Cut||Roland GS/GX-24||Graphtec|
|Blade: Standard, 3|
Setting: Heat Transfer, smooth
|Blade: Standard, 2|
Cut Speed: 1
Cut Pressure: 1
Gram Force: 60-70
Speed: 30 cm/s
Gram Force: 9-10
Speed: 30 cm/s
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Same Day or 1 day Shipping for orders placed
before 3:00 PM (Monday-Friday)
2-4 business day transit time.
See map above
Payment and Return/Exchange
Change pick up hours to Monday-Friday 8:00-4:00.
Same day pick up as long as order is placed
before 3:00 PM.
Please bring valid ID and invoice.