Crown Roll Leaf Foil Matt Silver 12"
Textile Foil For
foilings on to Textiles. Made in the U.S.A
Metallic foil Transfer is a special eye catching graphic
effect for t-shirts. It produces a shiny “metal-appearing” surface on various
types of fabrics by using a heat press
Step #1: Load Garment
Make sure your project surface is clean and pre heat press garment for 3-5 seconds to remove moisture and winkles.
Step #2: Position Transfer:
Place Transfer Media in desired location, adhesive material or ink side down and cover it with Teflon sheet.
Step #3: Heat Press
Heat press following settings by Heat Transfer Media
Siser Adhesive: 23 second at 300 -310 ° F
Screen Print: 10seconds at 310° F
OneStep HI Temp Plus NoWeed: 10 seconds at 330° F
Step #4: Hot Peel
Open heat press, Remove Teflon sheet and peel with smooth steady motion.
Step #5: Cut foil
Cut the foil a half inch bigger than the designed image
Step #6: Position Foil
Place foil over top of the image It is must be applied shiny side up.
Cover Foil with Teflon Sheet.
Step #7: Heat Press Foil
Heat press 10-15 sec. at 300-325° F
Step #8: Cool and Peel Foil
Peel off gently after completely cool down
For best durability of the foil after it is applied, it is recommended that the garment be hand washed or machine washed (delicate cycle) inside out and line or air dried. Do not use bleach. Do not iron printed area.
Recommended Washing Conditions:
1. Machine wash - Delicate cycle
2. Wash garment inside out
3. Washer temperature setting: Cold / Cold
4. Detergent: use Typical (All, or Tide w/Bleach Alternative)
5. Drying: Line or air dry only
Under these conditions,
T-shirt foils should hold up to 5 wash cycles.
A 15-20% loss of gloss or color brilliance is typical, even after the first wash, but foils should stay relatively intact.