HIX N-880 Clamshell Press

HIX N-880 Clamshell Press

Designed for High Volume and Large Transfers

The HIX N-880 air-operated automatic heat press provides you with a number capabilities that you’ll be able to depend on. With its efficiency, consistency, and rugged productivity, you’ll have the ability to get the edge-to-edge coverage you require for those larger transfers. The HIX N-880 offers all the capabilities and performance you need in a clamshell press.

Getting started with the N-880 is incredibly easy. Lowering the handle will trip a micro switch just before closure, and the machine will take over applying your preset pressure. At the end of the preset time, the machine will open automatically for you. This press helps reduce operator fatigue in long production runs.

The N-880 is built with a long-lasting pneumatic air cylinder lift system, a larger air valve for faster clamping, and bushings in key areas for durability. This all makes this machine more suitable for extra high volume work.

The HIX N-880 is also very useful in heavy traffic tourist retail shops where numerous garment types, such as sweats and T-shirts, are continuously being produced. Because it is air-operated, you can set the amount of pressure on the machine and it will adjust automatically to the product – no matter what the thickness.

The N-880 features a touch-screen controller with a built-in digital timer that is adjustable up to 99 minutes, 59 seconds. It also shows the time countdown on readout, beeps after elapsed time, and resets when the handle is raised. The calibrated digital temperature control is adjustable up to 450°F (232°C) and displays the current temperature. You can easily set the air pressure with the knob and see the PSI reading on the gauge. With the pre-press release, you can start pressing your garment to remove its wrinkles and then push the pre-press button to open the machine, all without having to wait for the end of the cycle for the press to open.

The N-880 is a commercial grade air-operated machine with a 16″ x 20″ (surface area) heat platen. It is built with a long-lasting pneumatic air cylinder lift system, a stronger air valve for faster clamping, and bushings at hinge points for maximum durability. This all makes this machine more suitable for extra high volume work.

If you have hundreds of items to heat press in one day (a common event in the business), your arms, shoulder and back will thank you! (This makes the press terrific for those with less than 100% use of their arms and shoulders.)

Features

  • Easy integrated digital time and temperature settings – Touch-screen controller allows simple dialing in of time and temperature. From the touch-screen controller, preset selections of temperature-time combinations can be easily programmed into the machine.

  • The current pressure is displayed on the touch-screen display each time the press closes. The pressure is easily changed with the black pressure dial on the face of the control housing (clockwise for more, counter-clockwise for less). There are nine settings: 0-3 for light pressure, 4-6 for medium, and 7-9 for heavy. This is a great feature if you need to press a lot of different thicknesses.

  • Tilting (floating) lower platen – The bottom platen tilts up toward the upper platen as the heat press closes. This equalizes pressure even when pressing thick items, like quarter-inch thick 8×10” ceramic tile.

  • Top Pressure Plate – The handle attaches to a 4″x5″ pressure plate on the top platen instead of a single screw going into the top platen. This provides more even pressure on the outside edges of the press (think of it as pushing down with your entire hand, versus just your thumb).

  • Certified electrically safe (ETL) – The “Electrical Testing Laboratory” seal means HIX presses have passed a rigid and very demanding independent testing process, and have been certified electrically safe.

  • 100% Made in the USA – HIX has its own 110,000 sq ft manufacturing facility with its very own fully integrated aluminum foundry, CNC mill operation, welding, metal forming, wiring, fabrication, assembly, and packaging departments.

  • A one-year general warranty and lifetime warranty on the heater element.

Dimensions: W 21” x H 15” x D 41”
Heat Platen Size: 16” x 20” (41 x 51 cm)
Weight Shipping: 136 lbs. (61 kg)

USA Shipping: UPS, FedEx & LTL Truck, (our choice).
For Shipping to Alaska, Hawaii, Puerto Rico and Canada please contact us for a quote: 
1-714-523-0344
A delivery signature is REQUIRED for all heat press purchases.

Sales Tax: We are required to collect 8% sales tax for California deliveries. 
If you are a California business and wish to provide your tax exemption certificate please contact us at 1-714-523-0344 for more info.

  • Product Code: N-880
  • Availability: In Stock
  • $2,795.00
  • Price in reward points: 0.0000