EasyPSV™ Permanent Glow Vinyl 13.5"

EasyPSV™ Permanent Glow Vinyl 13.5"

EASYPSV™ PERMANENT GLOW

 Siser® EasyPSV™ Glow is a permanent pressure sensitive vinyl with a gloss finish and soft pastel green hue used to create a glowing effectin dark areas. Great for decals, decorations, and signs for indoor and outdoor applications.
 This glow-in-the-dark PSVis best used for noveltyindoor decoration or gifts onplastic, wood, metal, and soon. Create scary Halloweendécor by putting creepyglow-eyes on woodblocks and placingthem around the house.You can even layer EasyPSVGlow on top of EasyPSVRemovable to create walldécor like stars and asolar system.

COLOR CODE



GLOW


ETCH


CHALKBOARD
Outdoor DurabilityIntended for indoor usage only.
Thickness4.2 mil (107 micron)
AdhesivePermanent, Solvent based
Liner90# Kraft
Minimum, Application Temperature+50° F
Shelf Life1 year when stored at 70° F and 50% relative humidity.
Materials that can be decorated with
EasyPSV Glitter include
Glass/mirrors, wood, plastic, metal, ceramic
Some common projects includeSigns, Halloween decorations, glass luminaries
*Permanent adhesive may harm drywall or other painted surfaces.
*Not recommended for use near flame/ heat source, or with microwave, and dishwasher.
Surface Prep InstructionsFor best adhesion, remove any dirt, dust, grease, etc to prepare the surface you want to
decorate with EasyPSV. The following cleaning method is not recommended for porous surfaces
such as unfinished/untreated wood. It is recommended that all other surfaces be spot tested
with care before cleaning the entire application area.

Non-porous surfaces can be cleaned with a mix of approximately 2 parts water and 1 part isopropyl
alcohol (70% or higher for bestresults) or non-ammonia based window cleaner. Use a microfiber or
lint free towel to clean the application area with the mixture.Paper towel is not recommended
since it will leave behind small bits of paper that can become trapped under the EasyPSV during
application. Ensure the area is completely dry before applying.
*The cleaning method outlined above is subject to modification and not always suitable for every substrate.
 The purchaser should independently determine with their own testing to use this method or not on a case by case basis.
Application Instructions 1. Place EasyPSV with the liner side down and cut your design. (DO NOT reverse/mirror your design.)
2. Weed excess vinyl.
3. Remove the application tape's paper liner. Place tape on top of EasyPSV and burnish with a squeegee.
4. Lift the application tape and EasyPSV away from the paper liner to expose the permanent adhesive.
5. Place the application tape on your desired object and burnish with a squeegee to fully adhere the design.
6. Gently peel away the application tape, leaving just your EasyPSV design on the object.
Removal InstructionsIf the EasyPSV peels up, but leaves an adhesive residue use an adhesive remover to clean the area.
If the EasyPSV is stubbornly sticking, the heat from a hair dryer or garment steamer can help loosen the
adhesive. However, heating is not recommended for glass due to possible shattering. To remove Permanent
EasyPSV from glass, saturate the decal with soap and water. Cover with plastic wrap and let sit for a few
hours before attempting to remove. An adhesive remover may still be required to clean all adhesive from
the surface after removing the EasyPSV.
*The removal instructions outlined above are subject to modification and not always suitable for every substrate.
 The purchaser should independently determine with their own testing to use this method or not on a case by case basis.
Storage InstructionsFor best results, avoid direct sunlight and extreme temperatures. Ideally, temperatures should not surpass
70° F and 50% relative humidity. When stored properly, EasyPSV Permanent has a shelf life of up to 1 year.




Payment



Shipping

Same Day or 1 day Shipping for orders placed
before 3:00 PM (Monday-Friday)
2-4 business day transit time.
See map above



Payment and Return/Exchange

Change pick up hours to Monday-Friday 8:00-4:00.
Same day pick up as long as order is placed
before 3:00 PM.
Please bring valid ID and invoice.


  • Product Code: PSVPG13.5
  • Availability: In Stock
  • $0.00
  • Price in reward points: 0.0000

Available Options