Siser CADflex HTV
Siser CADflex HTV
Siser CADflex HTV
Siser CADflex HTV
Siser CADflex HTV

Siser CADflex 19.66" Roll (Yard)

Product code: CF20P27R

Regular price $7.95
/
Shipping calculated at checkout.

Price per Yard
Quantity Unit Price
1 + $7.95
3 + $7.49
5 + $6.40
10 + $6.00
27 + $5.49

CADflex™ Heat Transfer Vinyl

Building Letter and Number Stock Has Never Been Easier!

CADflex is a heat transfer vinyl with a non-stick carrier that makes it perfect for stocking up and storing athletic names, numbers, and team logos. Prepare your team sets ahead of time by cutting multiple numbers and team logos and store them for quick use. CADflex is perfect for all sports including soccer, football, baseball, softball and more! Looking for an inexpensive way to add player numbers to leather shoes? CADflex is the answer! By using a shoe platen on your heat press, or a household iron, you can easily apply player numbers and give your team’s shoes a look that stands out!
Siser CADflex HTV
Specifications:
PVC Composition
• Non-stick backing • Semi-gloss finish • 175 Microns/6.8 Mils
• 45°/60° blade • Can not be layered
CUTTER SETTINGS
Cricut:
Blade: Standard
Setting: Iron On
Silhouette Cameo:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 6
Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s
Graphtec:
Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 25 cm/s
MH, SC2, LP3, Titan 1:
Blade: 45°/60°
Gram Force: 85-90
Speed: 300 mm/s
*Blade Advancing Varies
Titan 2 & 3
Blade: 45°/60°
Gram Force: 65-70
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)
• Cut in Reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use light/medium pressure for 10-15 seconds
• Peel carrier cold
RECOMMENDED ACCESSORIES & CARE
CADFlex Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Recommended Accessories:
Siser Weeder
Laundering:
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean