3 products
3 products
DTF · Powders
DTF Powder
Hot melt adhesive powders for DTF transfers. After printing on DTF film, the powder is applied to the wet ink and cured, then the transfer is heat pressed onto the garment.
Powders in this collection
| Powder | Details |
|---|---|
| HTV4U DTF Hot Melt Powder | Press at 300–320°F for 10–15 seconds. Available in 1 kg, 3 kg, 5 kg, 10 kg and 20 kg. Store at 60–80°F in a cool, dry place (30–50% humidity), away from direct sunlight. |
| Uninet Black DTF PreTreat Powder (1 lb / 2 lbs) | TPU hot melt adhesive powder. Best for black or dark-colored garments, where stray adhesive blends in with the garment. |
| Uninet White DTF PreTreat Powder (1 lb / 2 lbs) | TPU hot melt adhesive powder. Best for white or light-colored garments. |
Good to know
- Apply the powder within a few minutes of printing, before the ink dries.
- Uninet recommends curing at 120°C / 250°F for 120 seconds for A3 and A4 sheets; large images with heavy ink coverage may need a second bake.
Frequently asked questions
Which Uninet powder should I use?
Use black powder for black or dark-colored garments and white powder for white or light-colored garments.
How should I store HTV4U DTF Hot Melt Powder?
Store at 60–80°F in a cool, dry place with 30–50% humidity, and keep it away from direct sunlight.
Questions about sizes or colors? Call us at (714) 523-0344, Monday–Friday 8:00 AM–4:30 PM PT, or email orders@heattransfervinyl4u.com. Orders over $99 ship free and orders placed by 3 PM PT ship the same day.