10 products
10 products
Siser · Masks for print and cut
Siser TTD Masks for Print and Cut Materials
Siser TTD masks hold your printed and cut design in place so you can position it on the garment and press it. Choose TTD Easy Mask for everyday print and cut work, or TTD High Tack Mask when you need extra grip on large or detailed designs.
Sizes
| Mask | Sizes |
|---|---|
| Siser TTD High Tack Mask | 11.8" and 19.66" rolls by the yard; 29.5" × 50 yards; 59" × 50 yards |
| Siser TTD Easy Mask | 8.4" × 11" and 11" × 16.5" sheets; 12", 14.75" and 19.66" rolls by the yard; 29.5" × 50 yards |
Using the mask
- Cut a piece of mask slightly wider than the image, remove the paper backing and set it aside.
- Place the mask adhesive side up on a smooth, firm surface, then center the image face down over it.
- Use a squeegee at a 45° angle with firm pressure, working from the center outward in several directions.
- Lift a corner and separate the mask from the image, then place the image back on the shiny side of the original masking paper if you are not pressing it right away.
Frequently asked questions
Which mask should I choose?
TTD Easy Mask is the mask provided with our print and cut designs. TTD High Tack Mask is designed for ColorPrint Soft Opaque and recommended for large or detailed designs.
Can I use a cold laminator?
Yes. Siser recommends a cold laminator with the mask for large production runs.
Questions about sizes or colors? Call us at (714) 523-0344, Monday–Friday 8:00 AM–4:30 PM PT, or email orders@heattransfervinyl4u.com. Orders over $99 ship free and orders placed by 3 PM PT ship the same day.