 |
|
StripFlockĀ® Pro Heat Transfer VinylThe Only Flock in the Industry that can be Layered on Itself!A great alternative to embroidery, StripFlock Pro heat transfer vinyl gives logos a raised, textured, suede-like feel. The deep, opaque colors make StripFlockĀ Pro excellent for retro designs or anytime you want a rich look. StripFlock Pro looks excellent on caps, bags, and garments that need textured visual interest. Use Stripflock Pro as a base layer and cover with other materials or more StripFlock! The ability to layer this material allows you to say āyesā to multi-color designs.StripFlock Pro is CPSIA Certified so you can decorate kids' items with confidence. |
 |
|
Specifications: PVC composition ā¢ Pressure sensitive backing ā¢ Suede-like finish ā¢Ā 410 Microns/16.1 Mils ā¢ 45Ā°/60Ā° bladeā¢Can be layered |
 |
| CUTTER SETTINGS | |||
|
Siser Romeo & Juliet: Blade: 45Ā°/60Ā° Gram Force: 20-25 (45Ā°) / 15-20 (60Ā°) Offset: .250 Speed: 10 |
Cricut Explore Air: Blade: AutoBlade,Ā Standard Setting: Iron On |
Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Flocked Material: Smooth Speed: 5 Force: 6 |
Scan N Cut: Blade: Standard, 4 Cut Speed:Ā 5 Cut Pressure: 2 |
|
Roland GS/GX-24: Blade: 45Ā° Gram Force: 80-120 Offset: .250 Speed: 30 cm/s |
Graphtec: Blade: 45Ā° Gram Force: 10 Tool: CB09U+0 Speed: 30 cm/s |
Titan 2 & 3 Blade: 45Ā°/60Ā° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies |
Scan N Cut DX: Blade: AutoBlade Cut Speed:Ā 5 Half Cut:Ā 4 |
|
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. |
|||
| APPLICATION INSTRUCTIONS | |
|
Application Instructions (home iron) ā¢ Set iron dial between Cotton and Linen ā¢ Cover design with Kraft paper or non-stick cover sheet ā¢ Place on flat, hard surface (ironing board not recommended) ā¢ Press iron with medium/firm pressure (do not slide iron) ā¢ Press each section of design for 15 seconds ā¢ If areas of design lift after application, replace cover sheet and re-press for 10 seconds ā¢ Peel carrierĀ warm |
Application Instructions (heat press) ā¢ Cut in Reverse ā¢ Weed excess material ā¢ Preheat garment for 2-3 seconds ā¢ Apply design at 310Ā°F/155Ā°C ā¢ Use light/medium pressure for 15 seconds ā¢ Peel carrierĀ warm (at least 10 seconds off press) |
| RECOMMENDED ACCESSORIES & CARE | |||
|
StripFlock Pro Applies to: 100% cotton Poly/cotton blends 100% polyester Leather |
Recommended Accessories: Siser Weeder |
Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
