Bubble-Free Patterned Adhesive Vinyl
Printed on Special Calendered PVC (No Transfer Tape Provided)
• Pre-Printed Bubble-Free Pattern is the perfect media for your easy work!
• The vinyl is ready to be cut on a vinyl cutter with a thickness of
100 Microns/4 Mils with White Grid Backing.
100 Microns/4 Mils with White Grid Backing.
• It works great with no bubbles! The patterns use specialized adhesives that provide
a secure bond to the surface material yet allow the label to be removed
without leaving adhesive residue, damaging the surface, tearing the label within 24 hours.
a secure bond to the surface material yet allow the label to be removed
without leaving adhesive residue, damaging the surface, tearing the label within 24 hours.
• After applying the adhesive for more than 24 hours,
it will stay on the surface semi-permanently. The permanent design CAN be removed
but they will not leave adhesive residue on the surface and the label itself will not tear.
it will stay on the surface semi-permanently. The permanent design CAN be removed
but they will not leave adhesive residue on the surface and the label itself will not tear.
• Great for hard surfaces like glass, metal, plastic, and much more!
• Cut on Pattern Side and DO NOT MIRROR.
After the weeding process, apply transfer tape to transfer design off the backing.
After the weeding process, apply transfer tape to transfer design off the backing.
• After lifting up the design, apply it on the surface.
• Quantity discounts available!
| ORDER DESCRIPTION |
 |
| CUTTER SETTINGS | |||
|
Cricut: Blade: Standard Setting: Iron On |
Silhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6 |
Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 |
|
|
Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: 250 Speed: 25-50 cm/s |
Graphtec: Blade: 45° Gram Force: 9 Tool: CB09U+0 Speed: 25 cm/s |
MH, SC2, LP3, & Titan 1: Blade: 45°/60° Gram Force: 80-85 Speed: 300mm/s *Blade Advancing Varies |
Titan 2 & 3 Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies |
| Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. |
|||
| RECOMMENDED ACCESSORIES & CARE | |||
|
Recommended Accessories: |
|||
| CUSTOM PATTERNS AND DESIGNS |
|
Have your own patterns you want to print? Send us an email! heattransfer4u@gmail.com |
