 |
|
Siser EasySubli™ Heat Transfer VinylThe Latest Innovation in Sublimation!Never be limited to white polyester again when you switch to Siser® EasySubli™! This heat transfer vinyl is the key to unlocking the door to sublimation printing on colored polyester and other fabrics like cotton, rayon, wool and more. Brightest colors and best results are achieved when paired with Siser EasySubli Inks by Sawgrass and the SG500 or SG1000 printers. From craft business to corporate business, EasySubli is the sublimation solution for you!EasyPatterns are CPSIA Certified so you can decorate kids' items with confidence. |
 |
|
Specifications: Polyester composition • Static backing • Matte finish • 220 Microns/8.66 Mils • 45°/60° blade • Layering not recommended |
| CUTTER SETTINGS | |||
|
Cricut Explore Air: Blade: Standard Setting: Iron-On |
Cricut Maker: Blade: AutoBlade, Fine-Point Setting: Heat Transfer, (Non-Cricut) |
Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 2 |
Silhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Flocked Material: Smooth Speed: 8 Force: 15 |
|
Roland GS/GX-24: Blade: 45° Gram Force: 110-120 Offset: .250 Speed: 30 cm/s |
Graphtec: Blade: 45° Gram Force: 10-12 Tool: CB09U+0 Speed: 30 cm/s |
Titan 2 & 3 Blade: 45°/60° Gram Force: 100-110 Speed: 180mm/s *Blade Advancing Varies |
Minaki CG-60SR III: Blade: 45° Gram Force: 95 Offset: 30 Speed: 20-30 cm/s |
|
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. |
|||
| APPLICATION INSTRUCTIONS |
| • Print, cut, and weed material • Preheat garment for 2-3 seconds • Apply design at 311°F/155°C • Use medium pressure for 15 seconds • Peel mask warm |
| RECOMMENDED ACCESSORIES & CARE | |||
|
EasySubli Applies to: 100% cotton Poly/cotton blends 100% polyester |
Recommended Accessories: Siser Weeder |
Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Machine dry on low setting Do not dry clean Do not bleach |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Blade: Standard
Setting: Iron-On
