Sparkle™ Heat Transfer VinylMake Your Designs Shimmer and Sparkle!Sparkle Heat Transfer Vinyl is a fashionable alternative Glitter HTV by Siser. Specially constructed to be soft to the touch, each color includes silver glitter specks embedded in the material so designs have a smooth finish. Sparkle is available in 14 colors, including silver and gold. Looking to layer? Sparkle can be layered for ultimate bling! Think outside the box and use Sparkle HTV on shoes, belts, and other hard-to-print items. If you like to keep it simple, Sparkle can be applied to t-shirts, hoodies, sweats and scrubs too! |
Specifications: |
CUTTER SETTINGS | |||
Siser Romeo & Juliet: Blade: 45°/60° Gram Force: 5-10 Offset: .250 Speed: 10 |
Cricut Explore Air: Blade: AutoBlade, Standard Setting: Vinyl + |
Silhouette Cameo: |
Scan N Cut: Blade: Standard, 2 Cut Speed: 5 Cut Pressure: 1 |
Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: 250 Speed: 30-50 cm/s |
Graphtec: Blade: 45° Gram Force: 9-10 Tool: CB09+0 Speed: 30 cm/s |
Mimaki: Blade: 45°/60° Gram Force: 90 Offset: 250 Speed: 20-30 cm/s |
Titan 2 & 3 Blade: 45°/60° Gram Force: 80-85 Speed: 300mm/s *Blade Advancing Varies |
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. |
APPLICATION INSTRUCTIONS | |
Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier warm |
Application Instructions (heat press) • Cover with Heat Transfer Cover Sheet or Multipurpose Paper • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier hot or cold |
RECOMMENDED ACCESSORIES & CARE | |||
Sparkle Applies to: 100% cotton Poly/cotton blends 100% polyester Leather |
Recommended Accessories: |
Laundering: Wait 24 hours before 1st wash Machine wash warm or cold / mild detergent Dry on normal dryer setting Do not dry clean |