Siser EasyWeed EcoStretch
Siser EasyWeed EcoStretch
Siser EasyWeed EcoStretch
Siser EasyWeed EcoStretch
Siser EasyWeed EcoStretch
Siser EasyWeed EcoStretch
Siser EasyWeed EcoStretch
Siser EasyWeed EcoStretch

Siser EasyWeed EcoStretch 11.8" Roll (Yard)

Product code: EWECOS125064

Regular price $9.99
/
Shipping calculated at checkout.

Price per Yard
Quantity Unit Price
1 + $9.99
3 + $8.59
5 + $7.19
10 + $6.89
25 + $6.59
50 + $6.19

EasyWeed® EcoStretch™ Heat Transfer Vinyl

The lightweight, water-based HTV that stretches the boundaries of what's possible

EasyWeed EcoStretch heat transfer material by Siser® is lightweight, water-based, and applies at a low temperature so it's perfect for performance fabrics, spandex blends, and any other project that needs a little extra bounce back. Works with all craft cutters and can be applied with either a home iron or a heat press.

EasyWeed EcoStretch is CPSIA Certified so it's perfect for decorating children's clothing and accessories.
Specifications:
Water-Based composition
• Eco-Friendly (100% Recyclable) • True Matte finish • 80 Microns/3.15 Mils
• 45°/60° blade • Can be layered
CUTTER SETTINGS
Siser Romeo & Juliet:
Blade: 45°
Gram Force: 5-10
Offset: .250
Speed: 10
Cricut Explore Air:
Blade: AutoBlade, Standard
Setting: Vinyl +
Cricut Maker:
Blade: AutoBlade, Fine-Point
Setting: Heat Transfer (Non-Cricut)
Silhouette 4:
Blade: AutoBlade, 3
Force: 6
Speed: 8
Brother Scan N Cut DX:
Blade: AutoBlade
Cut Speed: 5
Half Cut: Auto
Roland GX-GS-24:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 30-50 cm/s
Graphtec:
Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 30 cm/s
Please note:
The cutter settings listed are suggested starting points that may need to be adjusted according to blade, cutting strip, and cutting mat wear.
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• Set iron dial between Cotton
• Cover design with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium pressure (do not slide iron) for 10-15 seconds
• Peel carrier hot
* If areas lift after application, cover and press for 10 seconds.
Application Instructions (heat press)
• Cut in reverse and weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 250°F/121°C (EasyPress® users add approx. 30°)
• Use medium pressure for 10-15 seconds
• Peel carrier hot
RECOMMENDED ACCESSORIES & CARE

EasyWeed EcoStretch Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Lycra / Spandex

Recommended Accessories:
Siser Weeder
Laundering:
Wait 24 hours before 1st wash
Machine wash cold with mild detergent
Do not bleach, dry clean. or use liquid fabric softener
Dry on low dryer setting