 |
|
EasyWeed® EcoStretch™ Heat Transfer VinylThe lightweight, water-based HTV that stretches the boundaries of what's possibleEasyWeed EcoStretch heat transfer material by Siser® is lightweight, water-based, and applies at a low temperature so it's perfect for performance fabrics, spandex blends, and any other project that needs a little extra bounce back. Works with all craft cutters and can be applied with either a home iron or a heat press.EasyWeed EcoStretch is CPSIA Certified so it's perfect for decorating children's clothing and accessories. |
 |
|
Specifications: Water-Based composition • Eco-Friendly (100% Recyclable) • True Matte finish • 80 Microns/3.15 Mils • 45°/60° blade • Can be layered |
| CUTTER SETTINGS | |||
|
Siser Romeo & Juliet: Blade: 45° Gram Force: 5-10 Offset: .250 Speed: 10 |
Cricut Explore Air: Blade: AutoBlade, Standard Setting: Vinyl + |
Cricut Maker: Blade: AutoBlade, Fine-Point Setting: Heat Transfer (Non-Cricut) |
Silhouette 4: Blade: AutoBlade, 3 Force: 6 Speed: 8 |
|
Brother Scan N Cut DX: Blade: AutoBlade Cut Speed: 5 Half Cut: Auto |
Roland GX-GS-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 30-50 cm/s |
Graphtec: Blade: 45° Gram Force: 8-9 Tool: CB09U+0 Speed: 30 cm/s |
Please note: The cutter settings listed are suggested starting points that may need to be adjusted according to blade, cutting strip, and cutting mat wear. |
|
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. |
|||
| APPLICATION INSTRUCTIONS | |
|
Application Instructions (home iron) • Set iron dial between Cotton • Cover design with Heat Transfer Cover Sheet or Multipurpose Paper • Place on flat, hard surface (ironing board not recommended) • Press iron with medium pressure (do not slide iron) for 10-15 seconds • Peel carrier hot * If areas lift after application, cover and press for 10 seconds. |
Application Instructions (heat press) • Cut in reverse and weed excess material • Preheat garment for 2-3 seconds • Apply design at 250°F/121°C (EasyPress® users add approx. 30°) • Use medium pressure for 10-15 seconds • Peel carrier hot |
| RECOMMENDED ACCESSORIES & CARE | |||
|
EasyWeed EcoStretch Applies to: |
Recommended Accessories: Siser Weeder |
Laundering: Wait 24 hours before 1st wash Machine wash cold with mild detergent Do not bleach, dry clean. or use liquid fabric softener Dry on low dryer setting |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
