 |
|
Holographic Eclipse Heat Transfer VinylGive you designs some attitude with Holographic Eclipse!Featuring a matte base with high-gloss patterns in all black, Holographic Eclipse depicts a fun, moody look. True to the Holographic name, the high-gloss patterns also give off a subtle color-changing effect in the light!
Holographic Eclipse measures in at just 90 microns— the same as EasyWeed! This not only makes it easier to cut and weed, but designs will also feel soft and lightweight when applied onto garments.
Holographic is CPSIA Certified so it’s perfect for decorating items intended for children. |
 |
|
Specifications: Polyester Composition • Pressure sensitive backing • Matte base with high-gloss patterns • 90 Microns/3.54 Mils • 45°/60° blade • Cannot be Layered |
 |
| CUTTER SETTINGS | |||
|
Siser Romeo & Juliet: Blade: 45°/60° Gram Force: 5-10 Offset: .250 Speed: 10 |
Cricut Explore Air: Blade: Standard Setting: Iron-On |
Silhouette Cameo: Blade: Standard, 3 Setting: Heat Transfer, Smooth Speed: 8 Force: 6 |
Scan N Cut: Blade: Standard, 2 Cut Speed: 5 Cut Pressure: 1 |
|
Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 30-50 cm/s |
Graphtec: Blade: 45° Gram Force: 8-9 Tool: CB09U+0 Speed: 30 cm/s |
MH, SC2, LP3, Titan 1: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies |
Titan 2 & 3 Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies |
|
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. |
|||
| APPLICATION INSTRUCTIONS | |
|
Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier cold |
Application Instructions (heat press) • Cut in Reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier cold |
| RECOMMENDED ACCESSORIES & CARE | |||
|
Holographic Eclipse Applies to: 100% cotton Poly/cotton blends 100% polyester Leather |
Recommended Accessories: Siser Weeder |
Laundering: Wait 24 hours before 1st wash Machine wash warm or cold / mild detergent Dry on normal dryer setting Do not dry clean |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
