 |
|
HT-ChameleonUnique Color Changing Material!Chameleon gradient change heat transfer vinyl gives the impression of different colors when viewed at different angles. Perfect for Halloween costumes, Christmas and birthday party gifts. to your creative kids or friends. HT-Chameleon can be awesome project material for everyone creative. |
 |
| CUTTER SETTINGS | ||
|
Cricut: Blade: Standard Setting: Light Cardstock |
Silhouette Cameo: Blade: Standard, 3 Material: Heat Transfer Material: Smooth Speed: 8 Force: 14 |
Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 3 |
|
Roland GS/GX-24: Blade: 45° Gram Force: 180-190 Offset: 250 Speed: 30 cm/s |
Graphtec: Blade: 45° Gram Force: 17-18 Tool: CB09U+0 Speed: 30 cm/s |
|
| Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. |
||
| APPLICATION INSTRUCTIONS | |
|
Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold |
Application Instructions (heat press) • Cut in Reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 320°F/160°C • Use medium pressure for 15-20 seconds • Peel carrier hot or cold |
| RECOMMENDED ACCESSORIES & CARE | |||
|
BlackBoard Applies to: 100% cotton Poly/cotton blends 100% polyester Leather |
Recommended Accessories: Siser Weeder |
Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean |
|
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
