 |
|
Easy™ Puff Metallic Heat Transfer VinylPuff and shine that looks divine!Featuring the same fun puffy effect as our standard Easy Puff, Easy Puff Metallic adds a new twist: a brilliant shiny finish! After heat applying, simply peel the carrier hot and heat press a second time to activate the puff. Designs will not only expand into 3D, but they'll also give off a beautiful gold or silver sheen! Perfect for big and bold artwork, Easy Puff Metallic has a unique look unlike anything you've seen before! Easy™ Puff is CPSIA Certified so it's perfect for decorating children's clothing and accessories. |
 |
|
Specifications: |
|
Important Application Notes:
• Easy Puff Metallic differs from our standard Easy Puff line and REQUIRES a 2-press application process. After the first press, the carrier must be peeled hot and the design should be covered with a cover sheet, then pressed a second time to activate the puff effect. • Because achieving proper, firm pressure is key with Easy Puff, it is not recommended to apply this material with a home iron.
• Texture of applied material can vary from lightly textured to heavily textured.
|
| CUTTER SETTINGS | |||
|
Siser Romeo & Juliet: Blade: 45°/60° Gram Force: 10-20 Offset: .250 Speed: 10 |
Cricut Maker: Blade: AutoBlade, Fine-Point Setting: Heat Transfer (Non-Circut) |
Brother Scan N Cut DX: Blade: AutoBlade Cut Speed: 5 Half Cut: Auto |
Silhouette Cameo 4: Blade: AutoBlade, 3 Material: Heat Transfer, Smooth Force: 6 Speed: 8 |
|
Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 30-50 cm/s |
Graphtec: Blade: 45° Gram Force: 8-9 Tool: CB09U+0 Speed: 30 cm/s |
US Cutter Titan 2 & 3: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies |
Mimaki CG-60SR III Blade: 45° Gram Force: 80 Offset: 30 Speed: 20-30 cm/s |
|
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. |
|||
| APPLICATION INSTRUCTIONS | |
|
Application Instructions (home iron) • It is not recommended to apply this material with a home iron. |
Application Instructions (heat press) |
| RECOMMENDED ACCESSORIES & CARE | |||
|
Easy Puff Metallic Applies to: 100% cotton Poly/cotton blends 100% polyester |
Recommended Accessories: Siser Weeder |
Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
