Siser EasyPatterns Plus Glow
Siser EasyPatterns Plus Glow
Siser EasyPatterns Plus Glow
Siser EasyPatterns Plus Glow
Siser EasyPatterns Plus Glow

Siser EasyPatterns Plus Glow 11.8" x 12" Sheet (Pre-Masked)

Product code: EPP12LIGHTNING

Regular price $8.00
/
Shipping calculated at checkout.

Price per Foot
Quantity Unit Price
1 + $8.00
3 + $7.87
9 + $7.35
15 + $6.64
30 + $6.30
75 + $5.94

EasyPatterns® Plus Glow Heat Transfer Vinyl

It's EasyPatterns Plus that now glow in the dark!

These pre-printed and pre-masked patterns will "charge" under light, and glow an eerie green in the dark! Just like other EasyPatterns Plus designs, EasyPatterns Plus Glow does not require a masking step. Simply cut designs mirrored carrier-side down just like any other HTV, weed away the excess material, and you're ready to apply! EasyPatterns Plus Glow is a great way to achieve glowing, patterned designs with just a single piece of HTV. However, it is not recommended to layer additional HTV on top, as EasyPatterns Plus Glow should be used as a top layer only.

EasyPatterns are CPSIA Certified so you can decorate kids' items with confidence.
Siser EasyPatterns Plus Glow
Specifications:
PU composition
• Pressure sensitive backing • Semi-gloss finish • 100 Microns/3.9 Mils
• 45°/60° blade

CUTTER SETTINGS
Siser Romeo & Juliet:
Blade: 45°/60°
Gram Force: 5-10
Offset: .250
Speed: 10
Cricut Explore Air:
Blade: AutoBlade, Standard
Setting: Iron-On
Cricut Maker:
Blade: AutoBlade, Fine-Point
Setting: Heat Transfer, (Non-Cricut)
Silhouette Cameo 4:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Material: Smooth
Speed: 8
Force: 6
Scan N Cut DX:
Blade: AutoBlade, 3
Cut Speed: 5
Half Cut: Auto
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s
Graphtec:
Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s
Titan 2 & 3
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• Mirror design and cut according to your cutter's settings
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron) for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)
• Cut material - MIRROR!
• Weed excess material
Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
RECOMMENDED ACCESSORIES & CARE
EasyPatterns Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Recommended Accessories:
Siser Weeder
Laundering:
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean
Do not bleach