Camouflage Glitter Pattern
Camouflage Glitter Patterned HTV
Camouflage Glitter Patterned HTV
Camouflage Glitter Pattern
Camouflage Glitter Patterned HTV
Camouflage Glitter Pattern
Camouflage Glitter Pattern
Camouflage Glitter Patterned HTV
Camouflage Glitter Patterned HTV
Camouflage Glitter Patterned HTV

Camouflage Glitter Patterned HTV (18.5" x 12")

Product code: PGHTV18.5-798

Regular price $13.49
/
Shipping calculated at checkout.

Price per Foot
Quantity Unit Price
1 + $13.49
3 + $11.67
9 + $10.52
15 + $9.78
30 + $9.00
75 + $8.03
Glitter Patterned HTV · CamouflagePrinted on HT-Printable GlitterSheet · 18.5" × 12"

Camouflage Glitter Patterned HTV (18.5" x 12")

13 glitter patterns, printed and ready to cut

HTV4U Glitter Patterned HTV printed on HT-Printable Glitter, with HT-Glitter Mask provided. Cut on the pattern side, weed, mask and press — no printer needed. This listing is a 18.5" wide × 12" long sheet.

📄 18.5" x 12" sheet · 🎨 13 patterns · 🎭 HT-Glitter Mask provided

18.5"Width
12"Length
320°FPress temp
WarmPeel
✨Printed on HT-Printable Glitter
🎭HT-Glitter Mask provided
📦Quantity discounts
🎨Custom patterns on request

🔥 Overview

Sparkle in every pattern

Choose from 13 Camouflage designs printed on HT-Printable Glitter. Each comes with HT-Glitter Mask, so after weeding you can lift your design off the backing and place it face up on the garment.

⚠️ Some patterns are not available in multiple scales, and some patterns are not seamless on a continuous roll.

✂️ How it works

From sheet to shirt

1

Cut — don't mirror

Cut on the pattern side. Do not mirror your design.

2

Weed

Remove the excess vinyl around your design.

3

Mask

Apply the HT-Glitter Mask to lift the design off its backing.

4

Press

Place face up and press at 320°F for 15–20 seconds.

🔥 Application

Application instructions

Heat press

  1. Cut the material — don't mirror.
  2. Weed the excess material.
  3. Mask with HT-Glitter Mask.
  4. Pre-heat the garment for 2–3 seconds.
  5. Apply at 320°F / 160°C.
  6. Use medium pressure for 15–20 seconds.
  7. Peel the carrier warm.

Home iron

  1. Cut the material — don't mirror.
  2. Weed the excess material.
  3. Set the iron between Cotton and Linen.
  4. Cover the design with Kraft paper or a non-stick cover sheet.
  5. Work on a flat, hard surface (not an ironing board).
  6. Press with medium/firm pressure — do not slide the iron.
  7. Press each section for 10–15 seconds.
  8. If an area lifts, re-cover and press 10 seconds more.
  9. Peel the carrier warm.

📋 Specifications

Details

FormatSheet
Width18.5"
Length12"
Printed onHT-Printable Glitter
MaskHT-Glitter Mask provided
Patterns13 to choose from
Cut settingPattern side up — do not mirror
Press320°F / 160°C · medium pressure · 15–20 sec
PeelWarm

✂️ Cutter settings

Recommended cutter settings

CricutBlade: StandardSetting: Iron On
Silhouette CameoBlade: Standard, 4Material: Heat Transfer, SmoothSpeed: 8 · Force: 11
Scan N CutBlade: Standard, 3Cut speed: 1 · Cut pressure: 5
Roland GS/GX-24Blade: 45°Gram force: 180–190 · Offset: 250Speed: 30 cm/s
GraphtecBlade: 45° · Tool: CB09U+0Gram force: 17Speed: 30 cm/s
MH, SC2, LP3 & Titan 1Blade: 45°/60°Gram force: 120–130Speed: 300 mm/s (blade advance varies)
Titan 2 & 3Blade: 45°/60°Gram force: 100–110Speed: 300 mm/s (blade advance varies)
Settings vary with blade condition and machine age — always do a test cut first.

🧺 Fabrics & care

Where it goes & how to wash it

Applies to

  • 100% cotton
  • Poly/cotton blends
  • 100% polyester
  • Leather
  • Lycra®/spandex

Laundering

  • Wait 24 hours before the first wash.
  • Machine wash cold with mild detergent.
  • Dry on the normal dryer setting.
  • Do not dry clean or bleach.

Have your own pattern? 🎨

We can print custom patterns and designs — email orders@heattransfervinyl4u.com to get started.

📦 Quantity discounts

Available on patterned vinyl.

🚚 Free shipping over $99

On qualifying orders.

⏱️ Ships same day

Order by 3 PM PT.

❓ FAQ

Frequently asked questions

What size is this?
This listing is a 18.5" wide × 12" long sheet.
Do I mirror my design?
No. Cut on the pattern side and do not mirror.
Is the mask included?
Yes — HT-Glitter Mask is provided.
What temperature do I press at?
320°F / 160°C with medium pressure for 15–20 seconds, then peel warm.
Can you print my own pattern?
Yes — email us your pattern or design and we will help.

💬 Contact

Questions about this Glitter Patterned HTV?

Our Buena Park team is happy to help with sizing, compatibility, and orders.

🏷️ This product is excluded from all promotional discounts and offers.