Christmas Glitter Pattern
Christmas Glitter Pattern
Christmas Glitter Pattern
Christmas Glitter Patterned HTV
Christmas Glitter Patterned HTV
Christmas Glitter Patterned HTV (12" x 12")
Christmas Glitter Patterned HTV
Christmas Glitter Patterned HTV
Christmas Glitter Pattern
Christmas Glitter Pattern
Christmas Glitter Pattern
Christmas Glitter Patterned HTV (12" x 12")
Christmas Glitter Patterned HTV (12" x 12")
Christmas Glitter Patterned HTV (12" x 12")
Christmas Glitter Patterned HTV (12" x 12")
Christmas Glitter Patterned HTV (12" x 12")

Christmas Glitter Patterned HTV (12" x 12")

Product code: PGHTV12-212

Regular price $9.99
/
Shipping calculated at checkout.

Price per Foot
Quantity Unit Price
1 + $9.99
3 + $8.65
9 + $7.99
15 + $7.25
30 + $6.67
75 + $5.95
Glitter Patterned HTV · ChristmasPrinted on HT-Printable GlitterSheet · 12" × 12"

Christmas Glitter Patterned HTV (12" x 12")

31 glitter patterns, printed and ready to cut

HTV4U Glitter Patterned HTV printed on HT-Printable Glitter, with HT-Glitter Mask provided. Cut on the pattern side, weed, mask and press — no printer needed. This listing is a 12" wide × 12" long sheet.

📄 12" x 12" sheet · 🎨 31 patterns · 🎭 HT-Glitter Mask provided

12"Width
12"Length
320°FPress temp
WarmPeel
✨Printed on HT-Printable Glitter
🎭HT-Glitter Mask provided
📦Quantity discounts
🎨Custom patterns on request

🔥 Overview

Sparkle in every pattern

Choose from 31 Christmas designs printed on HT-Printable Glitter. Each comes with HT-Glitter Mask, so after weeding you can lift your design off the backing and place it face up on the garment.

⚠️ Some patterns are not available in multiple scales, and some patterns are not seamless on a continuous roll.

✂️ How it works

From sheet to shirt

1

Cut — don't mirror

Cut on the pattern side. Do not mirror your design.

2

Weed

Remove the excess vinyl around your design.

3

Mask

Apply the HT-Glitter Mask to lift the design off its backing.

4

Press

Place face up and press at 320°F for 15–20 seconds.

🔥 Application

Application instructions

Heat press

  1. Cut the material — don't mirror.
  2. Weed the excess material.
  3. Mask with HT-Glitter Mask.
  4. Pre-heat the garment for 2–3 seconds.
  5. Apply at 320°F / 160°C.
  6. Use medium pressure for 15–20 seconds.
  7. Peel the carrier warm.

Home iron

  1. Cut the material — don't mirror.
  2. Weed the excess material.
  3. Set the iron between Cotton and Linen.
  4. Cover the design with Kraft paper or a non-stick cover sheet.
  5. Work on a flat, hard surface (not an ironing board).
  6. Press with medium/firm pressure — do not slide the iron.
  7. Press each section for 10–15 seconds.
  8. If an area lifts, re-cover and press 10 seconds more.
  9. Peel the carrier warm.

📋 Specifications

Details

FormatSheet
Width12"
Length12"
Printed onHT-Printable Glitter
MaskHT-Glitter Mask provided
Patterns31 to choose from
Cut settingPattern side up — do not mirror
Press320°F / 160°C · medium pressure · 15–20 sec
PeelWarm

✂️ Cutter settings

Recommended cutter settings

CricutBlade: StandardSetting: Iron On
Silhouette CameoBlade: Standard, 4Material: Heat Transfer, SmoothSpeed: 8 · Force: 11
Scan N CutBlade: Standard, 3Cut speed: 1 · Cut pressure: 5
Roland GS/GX-24Blade: 45°Gram force: 180–190 · Offset: 250Speed: 30 cm/s
GraphtecBlade: 45° · Tool: CB09U+0Gram force: 17Speed: 30 cm/s
MH, SC2, LP3 & Titan 1Blade: 45°/60°Gram force: 120–130Speed: 300 mm/s (blade advance varies)
Titan 2 & 3Blade: 45°/60°Gram force: 100–110Speed: 300 mm/s (blade advance varies)
Settings vary with blade condition and machine age — always do a test cut first.

🧺 Fabrics & care

Where it goes & how to wash it

Applies to

  • 100% cotton
  • Poly/cotton blends
  • 100% polyester
  • Leather
  • Lycra®/spandex

Laundering

  • Wait 24 hours before the first wash.
  • Machine wash cold with mild detergent.
  • Dry on the normal dryer setting.
  • Do not dry clean or bleach.

Have your own pattern? 🎨

We can print custom patterns and designs — email orders@heattransfervinyl4u.com to get started.

📦 Quantity discounts

Available on patterned vinyl.

🚚 Free shipping over $99

On qualifying orders.

⏱️ Ships same day

Order by 3 PM PT.

❓ FAQ

Frequently asked questions

What size is this?
This listing is a 12" wide × 12" long sheet.
Do I mirror my design?
No. Cut on the pattern side and do not mirror.
Is the mask included?
Yes — HT-Glitter Mask is provided.
What temperature do I press at?
320°F / 160°C with medium pressure for 15–20 seconds, then peel warm.
Can you print my own pattern?
Yes — email us your pattern or design and we will help.

💬 Contact

Questions about this Glitter Patterned HTV?

Our Buena Park team is happy to help with sizing, compatibility, and orders.

🏷️ This product is excluded from all promotional discounts and offers.