Siser EasyPatterns Plus Glow
Siser EasyPatterns Plus Glow
Siser EasyPatterns Plus Glow
Siser EasyPatterns Plus Glow
Siser EasyPatterns Plus Glow
Siser EasyPatterns Plus Glow
Siser EasyPatterns Plus Glow
Siser EasyPatterns Plus Glow

Siser EasyPatterns Plus Glow 11.8" x 12" Sheet (Pre-Masked)

Product code: EPP12LIGHTNING

Regular price $8.00
/
Shipping calculated at checkout.

Price per Foot
Quantity Unit Price
1 + $8.00
3 + $7.87
9 + $7.35
15 + $6.64
30 + $6.30
75 + $5.94

EasyPatterns® Plus Glow Heat Transfer Vinyl

It's EasyPatterns Plus that now glow in the dark!

These pre-printed and pre-masked patterns will "charge" under light, and glow an eerie green in the dark! Just like other EasyPatterns Plus designs, EasyPatterns Plus Glow does not require a masking step. Simply cut designs mirrored carrier-side down just like any other HTV, weed away the excess material, and you're ready to apply! EasyPatterns Plus Glow is a great way to achieve glowing, patterned designs with just a single piece of HTV. However, it is not recommended to layer additional HTV on top, as EasyPatterns Plus Glow should be used as a top layer only.

EasyPatterns are CPSIA Certified so you can decorate kids' items with confidence.
Siser EasyPatterns Plus Glow
Specifications:
PU composition
• Pressure sensitive backing • Semi-gloss finish • 100 Microns/3.9 Mils
• 45°/60° blade


CUTTER SETTINGS
Siser Romeo & Juliet:
Blade: 45°/60°
Gram Force: 5-10
Offset: .250
Speed: 10
Cricut Explore Air:
Blade: AutoBlade, Standard
Setting: Iron-On
Cricut Maker:
Blade: AutoBlade, Fine-Point
Setting: Heat Transfer, (Non-Cricut)
Silhouette Cameo 4:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Material: Smooth
Speed: 8
Force: 6
Scan N Cut DX:
Blade: AutoBlade, 3
Cut Speed: 5
Half Cut: Auto
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s
Graphtec:
Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s
Titan 2 & 3
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• Mirror design and cut according to your cutter's settings
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron) for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)
• Cut material - MIRROR!
• Weed excess material
Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
RECOMMENDED ACCESSORIES & CARE
EasyPatterns Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Recommended Accessories:
Siser Weeder
Laundering:
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean
Do not bleach