 |
|
EasyWeed® AdhesiveCreate Shining Decorations For Less!Shining statements, multicolor combinations, and so sew projects can all be achieved with EasyWeed Adhesive! Compatible with cost-effective screen printing foils and other materials that lend themselves to adhesion, this adhesive is a money saver and a money maker! Even on its own, EasyWeed Adhesive creates a glazed tone on tone appearance that's trending. The milky colored adhesive features a pressure sensitive carrier and low application temperature that's gentle enough for almost all heat sensitive fabrics. Cutting EasyWeed Adhesive is like any other EasyWeed product with the shiny, carrier side face down and image mirrored. For best visibility while weeding, we suggest placing the adhesive on a dark surface. *This product is excluded from all promotional discounts and offers. |
 |
|
Specifications: PET Composition • Pressure sensitive backing • Semi-gloss finish • 75 Microns/2.95 Mils • 45°/60° blade • Should be layered |
 |
| CUTTER SETTINGS | |||
|
Siser Romeo & Juliet: Blade: 45°/60° Gram Force: 5-10 Offset: .250 Speed: 10 |
Cricut Air: Blade: Standard Setting: Iron-On |
Silhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6 |
Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 |
|
Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s |
Graphtec: Blade: 45° Gram Force: 9-10 Tool: CB09U+0 Speed: 30 cm/s |
MH, SC2, LP3, Titan 1: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies |
Titan 2 & 3 Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies |
|
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. |
|||
| APPLICATION INSTRUCTIONS | |
|
Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5 seconds • Peel carrier hot |
Application Instructions (heat press) • Cut in Reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 275°F/135°C • Use medium pressure for 5-10 seconds • Peel carrier hot |
| RECOMMENDED ACCESSORIES & CARE | |||
|
EasyWeed Adhesive Applies to: 100% cotton Poly/cotton blends 100% polyester |
Recommended Accessories: Siser Weeder |
Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
