HT-Multi Colored FoilBeautiful & Shiny Multi Color Experience!HT-Multi colored foil heat transfer vinyl gives an unique addition to your vinyl projects. These beautiful and shiny multi color vinyls will change your design to an eye-catching and memorable piece. |
CUTTER SETTINGS | ||
Cricut: Blade: Standard Setting: Light Cardstock |
Silhouette Cameo: Blade: Standard, 3 Material: Heat Transfer Material: Smooth Speed: 8 Force: 14 |
Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 3 |
Roland GS/GX-24: Blade: 45° Gram Force: 180-190 Offset: 250 Speed: 30 cm/s |
Graphtec: Blade: 45° Gram Force: 17-18 Tool: CB09U+0 Speed: 30 cm/s |
|
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. |
APPLICATION INSTRUCTIONS | |
Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold |
Application Instructions (heat press) • Cut in Reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 320°F/160°C • Use medium pressure for 15-20 seconds • Peel carrier hot or cold |
RECOMMENDED ACCESSORIES & CARE | |||
Multi colored foil Applies to: 100% cotton Poly/cotton blends 100% polyester Leather |
Recommended Accessories: Siser Weeder |
Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean |