KODAK FTF (Film To Fabric) Transfer Film
KODAK FTF (Film To Fabric) Transfer Film

KODAK FTF (Film To Fabric) Transfer Film Roll (11.81” x 109 Yards)

Product code: 7494677

Sale price $147.15
/
Shipping calculated at checkout.

KODAK FTF (Film To Fabric) Transfer Release Film 

Kodak’s Film-to-Fabric DTF system delivers vibrant, high-quality fabric prints that last...

Developed to provide best-in-class transfer media for Film to Fabric (FTF) applications. Under heat, the film is dimensionally stable, provides clean image transfers, a matte finish, is anti-static, and is scratch resistant. At 158ºC you can transfer in 15 seconds.

* 1 roll : 109 yards (100m)

*This product is excluded from all promotional discounts and offers.

KODAK FTF (Film To Fabric) Transfer Film
The KODAK FTF Ink System Advantage
  • Whites work better — they’re brighter and cover even dark fabrics well
  • White and color inks stay in their lane — don’t worry about one covering the other or impacting the quality of the graphic
  • Colors are bright with very high density
  • The process is significantly faster than screen printing
  • The crock, or touch, is soft, stretchable, and resilient
  • The graphics resist sweating, washing, moisture, and rubbing – they stay crisp and gorgeous through multiple wear cycles
  • You get great detail and precision – the inks will lay where you put them
FTF Application Guide

Step 1 – Printing on Film
– Using a DTF inkjet printer, insert Kodak DTF/FTF transfer film in printer paper tray or on paper roll holder
– For Dark shirts: • print color image on the film • print white image layer on top of the color image
– For Light shirts: • print color image on the film

Step 2 – Powder Application
– Apply the Kodak DTF/FTF hot-melt powder uniformly on top of the wet print
– White powder may be used for all applications or black powder my be chosen for dark work
– Powder may be sprinkled manually onto the print in a tray and agitated to cover print completely
   • NOTE: an automated commercial shaker may also be used for powder application
– Ensure that the powder is evenly spread over the printed surface of the film
– Carefully remove excess powder

Step 3 – Melting the Powder
– Place the film with the printed image and the applied powder in a Curing Oven and heat for 2-3 minutes at 100-120ºC
OR
– Place the film inside a heat press, hovering and not applying pressure. A 4 to 7 mm gap between the film and the heat press top plate is recommended, for 3-5 minutes at 140-150ºC. Do not completely close the press.

Step 4 – Pre-pressing
– Pre-press the fabric prior to transfer of the image by the film for 2 to 5 seconds
   • Pre-pressing will flatten the fabric and remove excess humidity contained in the fabric
   • Pre-pressing helps in successful transfer of the image from the film onto the fabric

Step 5 – Transfer
– The film with the image and the melted powder is placed on the pre-pressed fabric in the heat press
– Press/Cure the image to the fabric for 10-20 seconds at 160-180ºC

Step 6 – Cold Peel
– Allow the film/image attached to the fabric to cool completely
– Separate the film from the fabric, leaving the desired image on the fabric

Step 7 – Post-pressing
– A post-press process is highly recommended for best results and high-performance parameters such as wash and rub fastness
– Re-press the image on the fabric for 10-20 seconds at 160-180ºC

Kodak Film Data Sheet