Siser Easy Puff HTV
Siser Easy Puff
Siser Easy Puff
Siser Easy Puff
Siser Easy Puff
Siser Easy Puff
Siser Easy Puff
Siser Easy Puff

Siser Easy Puff 11.8" x 12" Sheet

Product code: PUFF125064

Regular price $3.50
/
Shipping calculated at checkout.

Price per Foot
Quantity Unit Price
1 + $3.50
3 + $3.21
9 + $3.05
15 + $2.59
30 + $2.40
75 + $2.21
150 + $2.09

Easy Puff Heat Transfer Vinyl

The unique way to customize apparel!

Ready to raise your designs to the next level? As the name implies, Easy™ Puff is a unique HTV that "puffs" up from the garment when heat applied, transforming designs into a textured 3D look. Easy Puff provides a bold style that's perfect for lettering and other large designs that can highlight the elevated effect. With a pressure-sensitive carrier and low application temperature, Easy Puff truly lives up to its name!

Easy™ Puff is CPSIA Certified so it's perfect for decorating children's clothing and accessories.

Siser Easy Puff HTV

Specifications:
• PU Composition • 140 Microns/5.5 Mils

Important Application Notes:
• Easy Puff is designed to withstand only one heat application. Repeated applications will "flatten" the puff effect permanently. It is recommended to apply Easy Puff last when used with other materials.

• Because achieving proper, firm pressure is key with Easy Puff, it is not recommended to apply this material with a home iron.

• Texture of applied material can vary from lightly textured to heavily textured.
CUTTER SETTINGS
Siser Romeo & Juliet:
Blade: 45°/60°
Gram Force: 5-10
Offset: .250
Speed: 10
Cricut Maker:
Blade: AutoBlade, Fine-Point
Setting: Heat Transfer (Non-Circut)
Brother Scan N Cut DX:
Blade: AutoBlade
 Cut Speed: 5
Half Cut: Auto
Silhouette Cameo 4:
Blade: AutoBlade, 3
Material: Heat Transfer, Smooth
Force: 6
Speed: 8
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 30-50 cm/s
Graphtec:
Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 30 cm/s
US Cutter Titan 2 & 3:
Blade: 45°/60°
Gram Force: 80-85
Speed: 300 mm/s
*Blade Advancing Varies
Mimaki CG-60SR III
Blade: 45°
Gram Force: 80
Offset: 30
Speed: 20-30 cm/s
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• It is not recommended to apply this material with a home iron.
Application Instructions (heat press)
Cut on glossy side
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 280°F/138°C
• Use firm pressure for 8-10 seconds
• Peel carrier hot
RECOMMENDED ACCESSORIES & CARE
Easy Puff Applies to:
100% cotton
Poly/cotton blends
100% polyester
Recommended Accessories:
Siser Weeder
Laundering:
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean