 |
|
Metal Heat Transfer VinylMetallic Foil Look with a Super Soft Feel!Dazzle customers with this precious metal HTV! Available in silver and gold, Metal features show stopping shine with a smooth finish and soft hand that can be washed and worn without becoming lackluster. This fashion forward material is ideal for bridal parties, spirit wear, and any occasion that needs a touch of gleaming chrome! Due to Metal’s pressure sensitive carrier, you can use the Heat Press Weeding Trick (heating the platen and weeding the design on the heated surface) for smooth weeding! Metal can be cut with laser systems.Metal is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories. |
 |
|
Specifications: PET Composition • Pressure sensitive backing • Brushed metal finish • 100 Microns/3.9 Mils • 45°/60° blade • Top layer only |
 |
| CUTTER SETTINGS | |||
|
Siser Romeo & Juliet: Blade: 45°/60° Gram Force: 5-10 Offset: .250 Speed: 10 |
Cricut Explore Air: Blade: AutoBlade, Standard Setting: Vinyl + |
Silhouette Cameo: Blade: AutoBlade, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6 |
Scan N Cut: Blade: Standard, 2 Cut Speed: 5 Cut Pressure: 1 |
|
Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 30-50 cm/s |
Graphtec: Blade: 45° Gram Force: 9-10 Tool: CB09U+0 Speed: 30 cm/s |
MH, SC2, LP3, Titan 1: Blade: 45°/60° Gram Force: 85-90 Speed: 300 mm/s *Blade Advancing Varies |
Titan 2 & 3 Blade: 45°/60° Gram Force: 65-70 Speed: 300mm/s *Blade Advancing Varies |
|
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. |
|||
| APPLICATION INSTRUCTIONS | |
|
Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier cold |
Application Instructions (heat press) • Cut in Reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use light/medium pressure for 10-15 seconds • Peel carrier cold |
| RECOMMENDED ACCESSORIES & CARE | |||
|
Metal Applies to: 100% cotton Poly/cotton blends 100% polyester |
Recommended Accessories: Siser Weeder |
Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Hang item to dry Do not dry clean |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
