Patterned Glitter Heat Transfer Vinyl
Printed on Printable Glitter *HT-Glitter Mask Provided
*All patterns are printed as shown in the swatches.
*All patterns are printed as shown in the swatches.
• HTV4U Patterned Heat Transfer Vinyl is the perfect media for your needs!
• Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply
HT-Glitter Mask to transfer design off of the backing and place on your garment face up.
HT-Glitter Mask to transfer design off of the backing and place on your garment face up.
• We have a tons of variety and colors for you to choose from!
• Quantity discounts available!
*This product is excluded from all promotional discounts and offers.
| ORDER DESCRIPTION |
 |
| CUTTER SETTINGS | |||
|
Cricut: Blade: Standard Setting: Iron On |
Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Smooth Speed: 8 Force: 11 |
Scan N Cut: Blade: Standard, 3 Cut Speed: 1 Cut Pressure: 5 |
|
|
Roland GS/GX-24: Blade: 45° Gram Force: 180-190 Offset: 250 Speed: 30 cm/s |
Graphtec: Blade: 45° Gram Force: 17 Tool: CB09U+0 Speed: 30 cm/s |
MH, SC2, LP3, & Titan 1: Blade: 45°/60° Gram Force: 120-130 Speed: 300mm/s *Blade Advancing Varies |
Titan 2 & 3 Blade: 45°/60° Gram Force: 100-110 Speed: 300mm/s *Blade Advancing Varies |
|
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. |
|||
| APPLICATION INSTRUCTIONS | |
|
Application Instructions (home iron) • Cut material – don’t mirror! • Weed excess material • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier warm |
Application Instructions (heat press) • Cut material – don’t mirror! • Weed excess material • Mask with HT-Glitter Mask • Preheat garment for 2-3 seconds • Apply design at 320°F/160°C • Use medium pressure for 15-20 seconds • Peel carrier warm |
| RECOMMENDED ACCESSORIES & CARE | |||
|
Patterned Vinyls Apply to: 100% cotton Poly/cotton blends 100% polyester Leather Lycra®/spandex |
Recommended Accessories: |
Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean Do not bleach |
|
| CUSTOM PATTERNS AND DESIGNS |
|
Have your own patterns you want to print? Send us an email! heattransfer4u@gmail.com |
