American Puff Patterned HTV
American Puff Patterned HTV
American Puff Patterned HTV
American Puff Patterned HTV
American/ Patriotic Puff Patterned HTV (12" x 12")
American Puff Patterned HTV
American Puff Patterned HTV
Puff Patterned HTV
Puff Patterned HTV
Puff Patterned HTV
Puff Patterned HTV
Puff Patterned HTV
Puff Patterned HTV
American Themed Pattern
American Themed Pattern

American/ Patriotic Puff Patterned HTV (12" x 12")

Product code: PPHTV12-924

Regular price $9.99
/
Shipping calculated at checkout.

Price per Foot
Quantity Unit Price
1 + $9.99
3 + $8.65
9 + $7.99
15 + $7.25
30 + $6.67
75 + $5.95
Puff Patterned HTV · American / PatrioticPrinted on HT-Printable PuffSheet · 12" × 12"

American/ Patriotic Puff Patterned HTV (12" x 12")

24 raised 3D puff patterns, ready to cut

HTV4U Puff Patterned HTV printed on HT-Printable Puff, with TTD Easy Mask provided. Cut on the pattern side, weed, mask and press — no printer needed. This listing is a 12" wide × 12" long sheet.

📄 12" x 12" sheet · 🎨 24 patterns · 🎭 TTD Easy Mask provided

12"Width
12"Length
280–290°FPress temp
HotPeel
☁️Raised 3D puff finish
🎭TTD Easy Mask provided
📦Quantity discounts
🎨Custom patterns on request

🔥 Overview

Patterns that puff up

Choose from 24 American / Patriotic designs printed on HT-Printable Puff, with TTD Easy Mask provided. Heat raises the vinyl for a soft, dimensional look.

⚠️ Some patterns are not available in multiple scales, and some patterns are not seamless on a continuous roll.

✂️ How it works

From sheet to shirt

1

Cut — don't mirror

Cut on the pattern side. Do not mirror your design.

2

Weed

Remove the excess vinyl around your design.

3

Mask

Apply the TTD Easy Mask to lift the design off its backing.

4

Press

Place face up and press at 280–290°F for 8–10 seconds.

🔥 Application

Application instructions

Heat press

  1. Cut the material — don't mirror.
  2. Weed the excess material.
  3. Mask the design.
  4. Pre-heat the garment for 2–3 seconds.
  5. Apply at 280–290°F (137–143°C).
  6. Use medium pressure for 8–10 seconds.
  7. Peel the carrier hot.
  8. Cover and re-press for 2–3 seconds.

Home iron

  1. Set the iron between Cotton and Linen.
  2. Cover the design with Kraft paper or a non-stick cover sheet.
  3. Work on a flat, hard surface (not an ironing board).
  4. Press with medium/firm pressure — do not slide the iron.
  5. Press each section for 10–12 seconds.
  6. If an area lifts, re-cover and press 10 seconds more.
  7. Peel the carrier hot.
💡 Puff vinyl colors turn lighter once the vinyl puffs.

📋 Specifications

Details

FormatSheet
Width12"
Length12"
Printed onHT-Printable Puff
MaskTTD Easy Mask provided
Patterns24 to choose from
Cut settingPattern side up — do not mirror
Press280–290°F · medium pressure · 8–10 sec
PeelHot

✂️ Cutter settings

Recommended cutter settings

CricutBlade: StandardSetting: Iron On
Silhouette CameoBlade: Standard, 3Material: Heat Transfer, SmoothSpeed: 8 · Force: 6
Scan N CutBlade: Standard, 2Cut speed: 1 · Cut pressure: 1
Roland GS/GX-24Blade: 45°Gram force: 80–90 · Offset: 250Speed: 25–50 cm/s
GraphtecBlade: 45° · Tool: CB09U+0Gram force: 9Speed: 25 cm/s
MH, SC2, LP3 & Titan 1Blade: 45°/60°Gram force: 80–85Speed: 300 mm/s (blade advance varies)
Titan 2 & 3Blade: 45°/60°Gram force: 60–65Speed: 300 mm/s (blade advance varies)
Settings vary with blade condition and machine age — always do a test cut first.

🧺 Fabrics & care

Where it goes & how to wash it

Applies to

  • 100% cotton
  • Poly/cotton blends
  • 100% polyester
  • Leather
  • Lycra®/spandex

Laundering

  • Wait 24 hours before the first wash.
  • Machine wash cold with mild detergent.
  • Dry on the normal dryer setting.
  • Do not dry clean or bleach.

Have your own pattern? 🎨

We can print custom patterns and designs — email orders@heattransfervinyl4u.com to get started.

📦 Quantity discounts

Available on patterned vinyl.

🚚 Free shipping over $99

On qualifying orders.

⏱️ Ships same day

Order by 3 PM PT.

❓ FAQ

Frequently asked questions

What size is this?
This listing is a 12" wide × 12" long sheet.
Do I mirror my design?
No. Cut on the pattern side and do not mirror.
Is the mask included?
Yes — TTD Easy Mask is provided.
Will the colors change?
Puff vinyl colors turn lighter once the vinyl puffs.
What temperature do I press at?
280–290°F (137–143°C) with medium pressure for 8–10 seconds; peel hot.
Can you print my own pattern?
Yes — email us your pattern or design and we will help.

💬 Contact

Questions about this Puff Patterned HTV?

Our Buena Park team is happy to help with sizing, compatibility, and orders.

🏷️ This product is excluded from all promotional discounts and offers.