Siser Blackboard HTV
Siser Blackboard HTV
Siser Blackboard HTV
Siser Blackboard HTV
Siser Blackboard HTV
Siser Blackboard HTV
Siser Blackboard HTV
Siser Blackboard HTV

Siser BlackBoard 11.8" x 12" Sheet

Product code: BB125000

Regular price $3.99
/
Shipping calculated at checkout.

Price per Foot
Quantity Unit Price
1 + $3.99
3 + $3.71
9 + $3.52
15 + $3.05
30 + $2.97
75 + $2.87
150 + $2.80

BlackBoard™ Heat Transfer Vinyl

Write it, Wipe it, Repeat!

Now you can turn any fabric into a writable surface that can be used over and over again! New BlackBoard™ heat transfer vinyl by Siser®, transforms plain materials into a walking chalkboard – without making you feel like a walking sandwich board! Lightweight and super soft, BlackBoard is unlike any HTV you’ve ever experienced. This revolutionary material only needs 275°F of heat with medium pressure for just 15 seconds to create a machine washable chalkboard! With a low application temperature and warm peel carrier, this HTV is ideal for heat sensitive materials.

Compatible with standard chalk, Blackboard is as easy to re-use as it is to apply. Simply wipe clean with a damp cloth to start again! There are countless ways to advertise, organize, and customize with BlackBoard heat transfer vinyl.

BlackBoard is CPSIA Certified so it's perfect for decorating children's clothing and accessories.
Siser Blackboard HTV
Specifications:
PU composition
• Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.5 Mils
• 45°/60° blade • Layering not recommended
CUTTER SETTINGS
Siser Romeo & Juliet:
Blade: 45°/60°
Gram Force: 15-20
Offset: .250
Speed: 10
Cricut:
Blade: Standard
Setting: Paper
Silhouette Cameo:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 5
Thickness: 8
Scan N Cut:
Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 1
Roland GS/GX-24:
Blade: 45°
Gram Force: 70-80
Offset: .250
Speed: 50 cm/s
Graphtec:
Blade: 45°
Gram Force: 7-8
Tool: CB09U+0
Speed: 50 cm/s
MH, SC2, LP3, Titan 1:
Blade: 45°/60°
Gram Force: 80-85
Speed: 300 mm/s
*Blade Advancing Varies
Titan 2 & 3
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold
• Cover completed design and press for 5-10 seconds
Application Instructions (heat press)
• Cut in Reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 275°F/135°C
• Use light/medium pressure for 15 seconds
• Peel carrier warm or cold
RECOMMENDED ACCESSORIES & CARE
BlackBoard™ Applies to:
100% cotton
Poly/cotton blends
100% polyester
Recommended Accessories:
Siser Weeder
Laundering:
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean