Siser Easy Glow
Siser Easy Glow
Siser Easy Glow
Siser Easy Glow
Siser Easy Glow
Siser Easy Glow
Siser Easy Glow
Siser Easy Glow
Siser Easy Glow
Siser Easy Glow

Siser Easy Glow 11.8" x 12" sheet

Product code: EG125020

Regular price $4.50
/
Shipping calculated at checkout.

Price per Foot
Quantity Unit Price
1 + $4.50
3 + $4.24
9 + $3.99
15 + $3.53
30 + $3.23
75 + $3.07
150 + $2.89

Easy® Glow Heat Transfer Vinyl

Neon in the light, glows at night.

Have you ever wanted to make a glow in the dark design that was different than the typical eerie green? Enter Easy Glow: the HTV that glows in the dark - in multiple colors! Featuring a palette of vibrant, neon colors, Easy Glow looks stunning in the daytime on any garment! But where Easy Glow REALLY shines is in the dark. When the lights go out, Easy Glow gives off a luminous appearance in a variety of fluorescent colors! Great for costumes, kid's clothes, and party accessories, Easy Glow is a surefire way to light up your nights!

Easy Glow is CPSIA Certified so it's perfect for decorating children's clothing and accessories.
Siser Easy Glow
Specifications:
PU composition
• Laser Friendly • Semi-gloss finish • 150 Microns/5.91 Mils • 45°/60° blade
CUTTER SETTINGS
Siser Romeo & Juliet:
Blade: 45°/60°
Gram Force: 5-15
Offset: .250
Speed: 30
Cricut Explore Air:
Blade: Standard
Setting: Iron-On
Silhouette Cameo:
Blade: Standard, 3
Setting: Heat Transfer, Smooth
Speed: 8
Force: 6
Scan N Cut:
Blade: Standard, 2
Cut Speed: 5
Cut Pressure: 1
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 30-50 cm/s
Graphtec:
Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 30 cm/s
MH, SC2, LP3, Titan 1:
Blade: 45°/60°
Gram Force: 80-85
Speed: 300 mm/s
*Blade Advancing Varies
Titan 2 & 3
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS

Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• Peel carrier cold/warm
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds

Application Instructions (heat press)
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 15 seconds
• Peel carrier cold/warm (15 seconds off the press)
RECOMMENDED ACCESSORIES & CARE
Easy Glow Applies to:
100% cotton
Poly/cotton blends
100% polyester

Recommended Accessories:
Siser Weeder
Multipurpose Paper
Heat Transfer Cover Sheet

Laundering:
Wait 24 hours before 1st wash
Machine wash cold with mild detergent
Tumble dry low
Do not use fabric softener
Do not bleach or dry clean