 |
|
StripFlock® Heat Transfer VinylThe Only Flock in the Industry that can be Layered On Itself.A great alternative to embroidery, StripFlock heat transfer vinyl gives logos a raised, textured, suede-like feel. The deep, opaque colors make StripFlock excellent for retro designs or anytime you want a rich look. StripFlock looks excellent on caps, bags, and garments that need textured visual interest. Use Stripflock as a base layer and cover with other materials or more StripFlock! The ability to layer this material allows you to say “yes” to multi-color designs. |
 |
|
Specifications: PVC Composition • Pressure sensitive backing • Suede-like finish • 410 Microns/16.1 Mils • 45°/60° blade • Can be layered |
 |
| CUTTER SETTINGS | |||
|
Cricut: Blade: Standard Setting: Iron-On+ |
Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Flocked Speed: 5 Force: 6 |
Scan N Cut: Blade: Standard, 4 Cut Speed: 1 Cut Pressure: 2 |
|
|
Roland GS/GX-24: Blade: 45° Gram Force: 80-120 Offset: .250 Speed: 30 cm/s |
Graphtec: Blade: 45° Gram Force: 10 Tool: CB09U+0 Speed: 30 cm/s |
Titan Series Blade: 45°/60° Gram Force: 100-110 Speed: 180mm/s *Blade Advancing Varies |
|
|
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. |
|||
| APPLICATION INSTRUCTIONS | |
|
Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 15-20 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier cold |
Application Instructions (heat press) • Cut in Reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 320°F/160°C • Use medium pressure for 10-15 seconds • Peel carrier cold |
| RECOMMENDED ACCESSORIES & CARE | |||
|
StripFlock Applies to: 100% cotton Poly/cotton blends 100% polyester Leather |
Recommended Accessories: Siser Weeder |
Laundering: Wait 24 hours before 1st wash Machine wash warm or cold / mild detergent Dry on normal dryer setting Do not dry clean |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
