Siser Sparkle 11.8" Roll (Yard)
Siser Sparkle 11.8" Roll (Yard)
Siser Sparkle 11.8" Roll (Yard)
Siser Sparkle 11.8" Roll (Yard)
Siser Sparkle 11.8" Roll (Yard)

Siser Sparkle 11.8" Roll (Yard)

Product code: SP1250R

Regular price $9.99
/
Shipping calculated at checkout.

Price per Yard
Quantity Unit Price
1 + $9.99
3 + $8.99
5 + $7.59
10 + $7.39
25 + $6.99
50 + $6.59

Sparkle  Heat Transfer Vinyl

Our thinnest glittery HTV!

Sparkle Heat Transfer Vinyl is a fashionable alternative Glitter HTV by Siser. Sparkle has a smooth surface that's similar to Twinkle, but measures in at just 120 microns-making it our thinnest glittery HTV. Each color of Sparkle contains a mixture of colored and silver flakes. Sparkle also comes on a pressure-sensitive(sticky) backing to make weeding a breeze!

Specifications:
PU composition
• Pressure sensitive backing • Glitter finish • 225 Microns/9 Mils
• 45°/60° blade • Layerable


CUTTER SETTINGS
Cricut:
Blade: Standard
Setting: Glitter Iron-On 

Silhouette Cameo:
Blade: Standard, 2 Material: Heat Transfer, Smooth
Speed: 8
Force: 4

Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: 250
Speed: 25-50 cm/s
Graphtec:
Blade: 45°
Gram Force: 8-9
Tool: CB09+0
Speed: 30 cm/s
MH, SC2, LP3, Titan 1:
Blade: 45°/60°
Gram Force: 80-85
Speed: 300 mm/s
*Blade Advancing Varies
Titan 2 & 3
Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm
Application Instructions (heat press)
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
RECOMMENDED ACCESSORIES & CARE
Sparkle Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather

Recommended Accessories:
Siser Weeder

Laundering:
Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean