Tie Dye Puff Patterned HTV
Tie Dye Puff Patterned HTV
Puff Patterned HTV
Puff Patterned HTV
Puff Patterned HTV
Puff Patterned HTV
Puff Patterned HTV
Puff Patterned HTV
Tie Dye Puff Patterned HTV (12" x 12")
Tie Dye Puff Patterned HTV (12" x 12")
Tie Dye Patterned HTV
Tie Dye Patterned HTV
Tie Dye Patterned HTV

Tie Dye Puff Patterned HTV (12" x 12")

Product code: PPHTV12-845

Regular price $9.99
Shipping calculated at checkout.

Price per Foot
Quantity Unit Price
1 + $9.99
3 + $8.65
9 + $7.99
15 + $7.25
30 + $6.67
75 + $5.95

Puff Patterned Heat Transfer Vinyl
Printed on HT- Printable Puff *TTD Easy Mask Provided
*All patterns are printed as shown in the swatches.
Puff Patterned HTV
• HTV4U Puff Patterned Heat Transfer Vinyl is the perfect media for your needs!
• Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply
TTD Easy Mask to transfer design off of the backing and place on your garment face up.
• We have a tons of variety and colors for you to choose from!
• Quantity discounts available!

*This product is excluded from all promotional discounts and offers.

Blade: Standard
Setting: Iron On
Silhouette Cameo:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 6
Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: 250
Speed: 25-50 cm/s
Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s
MH, SC2, LP3, & Titan 1:
Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies
Titan 2 & 3
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-12 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot

Application Instructions (heat press)
• Cut material – don’t mirror!
• Weed excess material
• Mask with TTD High Tack Mask
• Preheat garment for 2-3 seconds
• Apply design at 280°F~290°F (137°C~143°C)
• Use medium pressure for 8-10 seconds
• Peel carrier hot
• Cover and reheat for 2-3 seconds

*Please consider that puff vinyl colors will turn lighter after puffed.

Patterned Vinyls Apply to:
100% cotton
Poly/cotton blends
100% polyester

Recommended Accessories:
Siser Weeder
Siser TTD Mask

Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean
Do not bleach
Have your own patterns you want to print?
Send us an email!