Siser EasyWeed Glow in the Dark 19.66" x 12" Sheet
Siser EasyWeed Glow in the Dark 19.66" x 12" Sheet
Siser EasyWeed Glow in the Dark 19.66" x 12" Sheet
Siser EasyWeed Glow in the Dark 19.66" x 12" Sheet
5
4

Siser EasyWeed Glow in the Dark 19.66" x 12" Sheet

Product code: EW20P5060S

Regular price $7.49
/
Shipping calculated at checkout.

Price per Foot
Quantity Unit Price
1 + $7.49
3 + $7.25
9 + $6.99
15 + $6.42
30 + $5.99
75 + $5.59
150 + $5.37

EasyWeed® Glow Heat Transfer Vinyl

Create Custom Designs that Glow in the Dark!

EasyWeed Glow is a white polyurethane heat transfer vinyl that looks great in the daylight and glows in the dark! Glow is available in white and it cuts and weeds like our popular EasyWeed heat transfer vinyl. To get the glow effect, “charge” the material by exposing it to sunlight. The more light you give it, the more it glows in the dark! Great for crafters looking to create kids’ pillow cases with messages that shine at bedtime. EasyWeed Glow is also perfect for simple Halloween costumes and can be layered on other Siser materials for awesome looks! EasyWeed Glow can be cut with laser systems

EasyWeed Glow is CPSIA Certified so even little ones can get in on the glow in the dark fun!
Specifications:
PU Composition
• Pressure sensitive backing • Matte finish • 90 Microns/3.5 Mils
• 45°/60° blade • Can be layered
CUTTER SETTINGS
Cricut:
Blade: Standard
Setting: Paper+
Silhouette Cameo:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 5
Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 30 cm/s
Graphtec:
Blade: 45°
Gram Force: 9-10
Tool: CB09U+0
Speed: 30 cm/s
MH, SC2, LP3, Titan 1:
Blade: 45°/60°
Gram Force: 80-85
Speed: 300 mm/s
*Blade Advancing Varies
Titan 2 & 3
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)
• Cut in Reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use light/medium pressure for 10-15 seconds
• Peel carrier hot or cold
RECOMMENDED ACCESSORIES & CARE
EasyWeed Glow Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Recommended Accessories:
Siser Weeder
Laundering:
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean