 |
|
Crown Roll Leaf – Hot Stamping FoilsMetallic Foil Transfer is a special eye catching graphic effect for t-shirts. It produces a shiny “metal-appearing” surface on various types of fabrics by using a heat press! *This product is excluded from all promotional discounts and offers. |
 |
| APPLICATION INSTRUCTIONS: |
| 1. Load garment. Make sure your project surface is clean 2. Press garment for 3-5 seconds to remove moisture and wrinkles 3. Place transfer media in desired location, adhesive material or ink side down and cover with Teflon sheet 4. Heat press following settings by Heat Transfer Media: 5. Open heat press and remove Teflon sheet 6. Peel hot with steady, smooth motion 7. Cut foil half an inch bigger than designed image 8. Place foil over the top of the image. Shiny side up 9. Cover foil with Teflon sheet 10. Heat press foil for 10-15 seconds at 300-325° F 11. Peel off gently after completely cool |
|
TYPE
|
TIME
|
TEMPERATURE
|
|
Siser Adhesive
|
23 seconds
|
300-310° F
|
|
Screen Print
|
10 seconds
|
310° F
|
| WASHING INSTRUCTIONS: |
| • Machine wash - Delicate cycle • Wash garment inside out • Washer temperature setting: Cold / Cold • Detergent: use Typical (All, or Tide w/Bleach Alternative) • Drying: Line or air dry only*For best durability of the foil after it is applied, it is recommended that the garment be hand washed or machine washed (delicate cycle) inside out and line or air dried. Do not use bleach. Do not iron printed area |
| Under these conditions: • T-shirt foils should hold up to 5 wash cycles • A 15-20% loss of gloss or color brilliance is typical, even after the first wash, but foils should stay relatively intact |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
