Siser Sparkle 11.8" x 12" Sheet
Siser Sparkle 11.8" x 12" Sheet
Siser Sparkle 11.8" x 12" Sheet
Siser Sparkle 11.8" x 12" Sheet
Siser Sparkle 11.8" x 12" Sheet

Siser Sparkle 11.8" x 12" Sheet

Product code: SP1250S

Regular price $3.75
/
Shipping calculated at checkout.

Price per Foot
Quantity Unit Price
1 + $3.75
3 + $3.50
9 + $3.15
15 + $2.85
30 + $2.70
75 + $2.52
150 + $2.35

Sparkle  Heat Transfer Vinyl

Our thinnest glittery HTV!

Sparkle Heat Transfer Vinyl is a fashionable alternative Glitter HTV by Siser. Sparkle has a smooth surface that's similar to Twinkle, but measures in at just 120 microns-making it our thinnest glittery HTV. Each color of Sparkle contains a mixture of colored and silver flakes. Sparkle also comes on a pressure-sensitive(sticky) backing to make weeding a breeze!

Specifications:
PU composition
• Pressure sensitive backing • Glitter finish • 225 Microns/9 Mils
• 45°/60° blade • Layerable


CUTTER SETTINGS
Cricut:
Blade: Standard
Setting: Glitter Iron-On 

Silhouette Cameo:
Blade: Standard, 2 Material: Heat Transfer, Smooth
Speed: 8
Force: 4

Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: 250
Speed: 25-50 cm/s
Graphtec:
Blade: 45°
Gram Force: 8-9
Tool: CB09+0
Speed: 30 cm/s
MH, SC2, LP3, Titan 1:
Blade: 45°/60°
Gram Force: 80-85
Speed: 300 mm/s
*Blade Advancing Varies
Titan 2 & 3
Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm
Application Instructions (heat press)
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
RECOMMENDED ACCESSORIES & CARE
Sparkle Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather

Recommended Accessories:
Siser Weeder

Laundering:
Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean