Currency Glitter Patterned HTV
Currency Glitter Patterned HTV
Currency Glitter Patterned HTV
Currency Glitter Patterned HTV
Currency Glitter Patterned HTV
Currency Glitter Patterned HTV
Currency Glitter Patterned HTV (12" x 12")
Currency Glitter Patterned HTV (12" x 12")
Currency Glitter Patterned HTV (12" x 12")

Currency Glitter Patterned HTV (12" x 12")

Product code: PGHTV-176

Regular price $9.99
/
Shipping calculated at checkout.

Price per Foot
Quantity Unit Price
1 + $9.99
3 + $8.65
9 + $7.99
15 + $7.25
30 + $6.67
75 + $5.95

Patterned Glitter Heat Transfer Vinyl
Printed on Printable Glitter  *HT-Glitter Mask Provided
*All patterns are printed as shown in the swatches.
Glitter Patterned HTV  Glitter Patterned HTV Texture
HTV4U Patterned Heat Transfer Vinyl is the perfect media for your needs!
• Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply
HT-Glitter Mask to transfer design off of the backing and place on your garment face up.
• We have a tons of variety and colors for you to choose from!
Quantity discounts available!

*This product is excluded from all promotional discounts and offers.

ORDER DESCRIPTION
CUTTER SETTINGS
Cricut:
Blade: Standard
Setting: Iron On
Silhouette Cameo:
Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11
Scan N Cut:
Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5
Roland GS/GX-24:
Blade: 45°
Gram Force: 180-190
Offset: 250
Speed: 30 cm/s
Graphtec:
Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s
MH, SC2, LP3, & Titan 1:
Blade: 45°/60°
Gram Force: 120-130
Speed: 300mm/s
*Blade Advancing Varies
Titan 2 & 3
Blade: 45°/60°
Gram Force: 100-110
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• Cut material – don’t mirror!
• Weed excess material
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm
Application Instructions (heat press)
• Cut material – don’t mirror!
• Weed excess material
• Mask with HT-Glitter Mask
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use medium pressure for 15-20 seconds
• Peel carrier warm
RECOMMENDED ACCESSORIES & CARE
Patterned Vinyls Apply to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Lycra®/spandex

Recommended Accessories:
Siser Weeder
HT-Glitter Mask

Laundering:
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean
Do not bleach
CUSTOM PATTERNS AND DESIGNS
Have your own patterns you want to print?
Send us an email!

heattransfer4u@gmail.com