multitran.jpg
FOREVER Multi-Trans Metallic 8.5" x 11" (10 Sheets)
FOREVER Multi-Trans Metallic 8.5" x 11" (10 Sheets)

FOREVER Multi-Trans Metallic 8.5" x 11" (10 Sheets)

Product code: FMTM8.5x11

Regular price $20.95
/
Shipping calculated at checkout.

Price per 10 Sheets
Quantity Unit Price
1 + $20.95
3 + $19.45
5 + $18.50
10 + $15.90

FOREVER Multi-Trans Metallic Heat Transfer Paper for Laser Printers - Gold & Silver

FOREVER Laser Multi-Trans for hard surface transfer paper has been on the market for almost 20 years and it is suitable for printing multi-colored designs onto white or light colored surfaces. With the new FOREVER Multi-Trans Metallic Gold and Silver, you can now bring a little style and luxury to mug printing as well as many other hard surfaces. Impress your customers with something new and unique!

Download Instructions
ADVANTAGES:
• Multiple surface applications
• Fast print
• Luxury style
• Suitable even for a Black & White printer
• Easy transfer process (1-Paper-System process)
• All you need is a Black & White printer!
STEP #1: PRINTING IMAGE:
OKI WHITE TONER PRINTERS:
Paper & Print:
Labels, Multi-Purpose Tray
Image Mode:
Mirror Image, White: off
CMYK PRINTERS:
Paper & Print:
Labels, Multi-Purpose Tray
Image Mode:
Mirror Image
Density:
Increase density if error occurs
STEP #2: TRANSFERRING IMAGE:
HARD SURFACES

1. Set the temperature of the Heat Press to 200°C / 392°F
2. Pre-heat your heat press before use
3. Position and fix the printed image to the application using a heat resistant tape
4. Place the sensor of a digital thermometer between the substrate and the transfer
5. Cover the transfer with a 2.5mm silicone pad
6. Press together until the thermometer displays the temperature shown in the table below
7. Cool the surface down by dipping into cold water. Make sure the transfer media is soft before separating
* At this point, the application is very hot. Be careful when moving the application
HARD SURFACES
HEAT PRESS SETTINGS
Glass & Metal
Opening at 135°C / 275°F • high pressure
MUGS

1. Pre-heat your Mug Press before use
2. Position and fix the printed image to the mug using a heat resistant tape
3. Cover the transfer with a 1mm silicone pad
4. Place the mug in the press
5. Press by using the settings below
5. Cool the mug down by dipping into cold water. Make sure the transfer media is soft before peeling
*At this point, the mug is very hot. Take precautions when moving the mug.
MUGS
HEAT PRESS SETTINGS
Mugs
160°C / 320°F • 180 sec. • high pressure
* IMPORTANT: The timer of the mug press should not start until the mug has reached the set temperature. If your press does not do this automatically, increase the press time to 4 minutes!

HOW TO APPLY