HT-Multi Colored Foil 20" Roll (Yard)
HT-Multi Colored Foil 20" Roll (Yard)

HT-Multi Colored Foil 20" Roll (Yard)

Product code: HT-MF20R-FHM30G

Regular price $6.98
/
Shipping calculated at checkout.

Price per Yard
Quantity Unit Price
1 + $6.98
3 + $6.64
5 + $6.30
10 + $6.00
25 + $5.85
54 + $5.78

HT-Multi Colored Foil

Beautiful & Shiny Multi Color Experience!

HT-Multi colored foil heat transfer vinyl gives an unique addition to your vinyl projects. These beautiful and shiny multi color vinyls will change your design to an eyecatching and memorable piece.
CUTTER SETTINGS
Cricut:
Blade: Standard
Setting: Light Cardstock
Silhouette Cameo:
Blade: Standard, 3
Material: Heat Transfer
Material: Smooth
Speed: 8
Force: 14
Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 3
Roland GS/GX-24:
Blade: 45°
Gram Force: 180-190
Offset: 250
Speed: 30 cm/s
Graphtec:
Blade: 45°
Gram Force: 17-18
Tool: CB09U+0
Speed: 30 cm/s
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)
• Cut in Reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use medium pressure for 15-20 seconds
• Peel carrier hot or cold
RECOMMENDED ACCESSORIES & CARE
BlackBoard Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Recommended Accessories:
Siser Weeder
Laundering:
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean