HT-Puff Glow in the Dark
HT-Puff Glow in the Dark
HT-Puff Glow in the Dark
 HT-Puff Glow in the Dark
 HT-Puff Glow in the Dark

HT-Puff Glow in the Dark 20" Roll (Yard)

Product code: HT-PFG20R

Regular price $13.26
Shipping calculated at checkout.

Price per Yard
Quantity Unit Price
1 + $13.26
3 + $12.85
5 + $12.44
10 + $12.05
25 + $11.62
54 + $11.21

HT-Puff Glow in the Dark

Try our new HT-Puff Glow in the Dark Heat Transfer Vinyl for 3D soft puff look!  This vinyl puffs up after heat press on your garment.

HT-Glow in the Dark Puff glows in the dark when it absorbs enough light. With enough exposure to light, it glows for long hours with bright luminous colors.

Be as creative as you can be with this fun, innovative vinyl! The puff vinyl will have your finished product with the "puffed up" appearance. It will produce a three-dimensional feel and touch to the print.

When heat is applied, 3D puffs up to create a unique texture to letters and shapes. It can create an authentic look without using embroidery for the popular retro vintage look. It can be used for numbering uniforms such as baseball, soccer, or basketball or for a wide range of novelty or fashion shirts. Imagine creating special effects for a design with a snowman, clouds, or letters.

*If the vinyl doesn't press smoothly down onto the flat surface it may result in some strange wrinkles and indentations. We recommend to test-press before starting your project.

HT-Puff Glow in the Dark
130~140 Micron (before), 450~500 Micron (after)
284°F~293°F (140°C~145°C)
Please make sure to test the temperature first due to the heat sensitivity of material.
8~10 Seconds
Cutting Setting 45 degree cut
Apply to Cotton, Uncoated Polyester, Cotton-Polyester Blends excluding Nylon
- Puff Heat Transfer Vinyl: Cuttable vinyl with protective carrier and hot melt backing
- Soft and Fluffy Puff effect is activated upon heat press and removal or protective film
- Available in 20" width roll with 10 color options
Be aware of the result that 2mm or smaller space will disappear
when puff is activated.
- Plotter cut the wanted design on hot melt layer
- Weed the unwanted material
- Place it on the fabric
- Press at medium pressure
- Remove the protective carrier at Hot Peel
Our information is intended for general guidance and we recommend actual tests be done before main jobs to find suitable setting for you.