Try our new HT-Puff Neon Heat Transfer Vinyl for 3D soft puff look! Offering 5 Color options, this vinyl puffs up after heat press on your garment.
When heat is applied, 3D puffs up to create a unique texture to letters and shapes. It can create an authentic look without using embroidery for the popular retro vintage look. It can be used for numbering uniforms such as baseball, soccer, or basketball or for a wide range of novelty or fashion shirts. Imagine creating special effects for a design with a snowman, clouds, or letters.
*If the vinyl doesn't press smoothly down onto the flat surface it may result in some strange wrinkles and indentations. We recommend to test-press before starting your project.
||145~155 Micron (before), 450~500 Micron (after)|
300°F (149°C) / 275°F (135°C) - Neon Orange only
Please make sure to test the temperature first due to the heat sensitivity of material.
|Cutting Setting||45 degree cut|
|Apply to||Cotton, Uncoated Polyester, Cotton-Polyester Blends excluding Nylon|
- Puff Heat Transfer Vinyl: Cuttable vinyl with protective carrier and hot melt backing
- Soft and Fluffy Puff effect is activated upon heat press and removal or protective film
- Available in 20" width roll with 10 color options
|Be aware of the result that 2mm or smaller space will disappear
when puff is activated.
|- Plotter cut the wanted design on hot melt layer
- Weed the unwanted material
- Place it on the fabric
- Press at medium pressure
- Remove the protective carrier at Hot Peel
|Our information is intended for general guidance and we recommend actual tests be done before main jobs to find suitable setting for you.|