Puff Patterned HTV
Puff Patterned HTV
Puff Patterned HTV
Puff Patterned HTV
Polka Dot Patterned HTV
Polka Dot Patterned HTV
Polka Dot Patterned HTV
Polka Dot Puff Patterned HTV (12" x 12")
Polka Dot Puff Patterned HTV (12" x 12")

Polka Dot Puff Patterned HTV (12" x 12")

Product code: PPHTV12-619

Regular price $9.99
Shipping calculated at checkout.

Price per Foot
Quantity Unit Price
1 + $9.99
3 + $8.25
9 + $7.89
15 + $7.15
30 + $6.57
75 + $5.85

Puff Patterned Heat Transfer Vinyl
Printed on HT- Printable Puff *TTD Easy Mask Provided
*All patterns are printed as shown in the swatches.
Puff Patterned HTV
• HTV4U Puff Patterned Heat Transfer Vinyl is the perfect media for your needs!
• Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply
TTD Easy Mask to transfer design off of the backing and place on your garment face up.
• We have a tons of variety and colors for you to choose from!
• Quantity discounts available!

*This product is excluded from all promotional discounts and offers.

Blade: Standard
Setting: Iron On
Silhouette Cameo:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 6
Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: 250
Speed: 25-50 cm/s
Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 25 cm/s
MH, SC2, LP3, & Titan 1:
Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies
Titan 2 & 3
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-12 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot

Application Instructions (heat press)
• Cut material – don’t mirror!
• Weed excess material
• Mask with TTD High Tack Mask
• Preheat garment for 2-3 seconds
• Apply design at 280°F~290°F (137°C~143°C)
• Use medium pressure for 8-10 seconds
• Peel carrier hot
• Cover and reheat for 2-3 seconds

*Please consider that puff vinyl colors will turn lighter after puffed.

Patterned Vinyls Apply to:
100% cotton
Poly/cotton blends
100% polyester

Recommended Accessories:
Siser Weeder
Siser TTD Mask

Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean
Do not bleach
Have your own patterns you want to print?
Send us an email!