Patterned Heat Transfer Vinyl
Printed on Siser ColorPrint Easy *TTD Easy Mask Provided
*All patterns are printed as shown in the swatches.
*All patterns are printed as shown in the swatches.
• HTV4U Patterned Heat Transfer Vinyl is the perfect media for your needs!
• Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply
TTD Easy Mask to transfer design off of the backing and place on your garment face up.
TTD Easy Mask to transfer design off of the backing and place on your garment face up.
• We have a tons of variety and colors for you to choose from!
• Quantity discounts available!
• Please be sure to check out the instructional video below for easy application instructions.
*This product is excluded from all promotional discounts and offers.
| ORDER DESCRIPTION |
 |
| CUTTER SETTINGS | |||
|
Cricut: Blade: Standard Setting: Iron On |
Silhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6 |
Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 |
|
|
Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: 250 Speed: 25-50 cm/s |
Graphtec: Blade: 45° Gram Force: 9 Tool: CB09U+0 Speed: 25 cm/s |
MH, SC2, LP3, & Titan 1: Blade: 45°/60° Gram Force: 80-85 Speed: 300mm/s *Blade Advancing Varies |
Titan 2 & 3 Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing Varies |
| Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. |
|||
| APPLICATION INSTRUCTIONS | |
|
Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier hot or cold |
Application Instructions (heat press) • Cut material – don’t mirror! • Weed excess material • Mask with TTD High Tack Mask • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier hot or cold • Cover and reheat for 2-3 seconds |
| RECOMMENDED ACCESSORIES & CARE | |||
|
Patterned Vinyls Apply to: 100% cotton Poly/cotton blends 100% polyester Leather Lycra®/spandex |
Recommended Accessories: |
Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean Do not bleach |
|
| CUSTOM PATTERNS AND DESIGNS |
|
Have your own patterns you want to print? Send us an email! heattransfer4u@gmail.com |
