 |
|
Brick® 600 Heat Transfer VinylOur Thickest Heat Transfer Vinyl – Now Easier to Cut and ApplyThin or thick, materials of all sizes have a place in garment decorating! Siser Brick® 600 is a 600 micron thick, flexible heat transfer vinyl that’s designed for smaller logos and designs to add extra dimension to your garments. Brick 600’s matte finish looks great on caps, bags, and is ideal for left chest logos. Next time you feel your design is just too flat, consider giving it some dimension with Brick 600 by Siser! Brick 600 can be cut with laser systems.Brick is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories. |
 |
|
Specifications: PU Composition • Pressure sensitive backing • Matte finish • 600 Microns/23.6 Mils • 45°/60° blade |
 |
| CUTTER SETTINGS | |||
|
Siser Romeo & Juliet: Blade: 60° Gram Force: 12-17 Offset: .250 Speed: 10 |
Cricut: Blade: Standard Cardstock Light+ |
Silhouette Cameo: Blade: Standard, 10 Material: Heat Transfer, Flocked Speed: 4 Force: 33 |
Scan N Cut: Blade: Standard, 10 Cut Speed: 1 Cut Pressure: 2 |
|
Roland GS/GX-24: Blade: 60° * Gram Force: 150-190 Offset: .250 Speed: 30 cm/s |
Graphtec: Blade: 60° * Gram Force: 11-12 Tool: CB09U+0 Speed: 25 cm/s |
MH, SC2. LP3, & Titan 1: Blade: 45°/60° Gram Force: 120-130 Speed: 300mm/s *Blade Advancing Varies |
Titan Series Blade: 45°/60° Gram Force: 100-110 Speed: 300mm/s *Blade Advancing Varies |
|
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.* For Roland & Graphtec cutters, due to the material thickness, extend the blade out so that a significant amount of blade is exposed. |
|||
| APPLICATION INSTRUCTIONS | |
|
Application Instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier cold |
Application Instructions (heat press) • Cut in Reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 310°F/155°C • Use medium/firm pressure for 20 seconds • Peel carrier cold |
| RECOMMENDED ACCESSORIES & CARE | |||
|
Brick 600 Applies to: 100% cotton Poly/cotton blends 100% polyester |
Recommended Accessories: Siser Weeder |
Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on low dryer setting Do not dry clean |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
