Brick 600 Fluorescent
Brick 600 Fluorescent
Siser Brick 600 Fluorescent
Siser Brick 600 Fluorescent
Siser Brick 600 HTV
Siser Brick 600 HTV
Siser Brick 600 HTV
Siser Brick 600 HTV
Siser Brick 600 HTV
Siser Brick 600 HTV

Siser Brick 600 Fluorescent 19.66" Roll (Yard)

Product code: BR60020P5020

Regular price $19.99
Shipping calculated at checkout.

Price per Yard
Quantity Unit Price
1 + $19.99
3 + $17.99
5 + $15.99
10 + $14.99

Brick® 600 Heat Transfer Vinyl

Our Thickest Heat Transfer Vinyl – Now Easier to Cut and Apply

Thin or thick, materials of all sizes have a place in garment decorating! Siser Brick® 600 is a 600 micron thick, flexible heat transfer vinyl that’s designed for smaller logos and designs to add extra dimension to your garments. Brick 600’s matte finish looks great on caps, bags, and is ideal for left chest logos. Next time you feel your design is just too flat, consider giving it some dimension with Brick 600 by Siser! Brick 600 can be cut with laser systems.

Brick is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories.
Siser Brick 600 Fluorescent
PU Composition
• Pressure sensitive backing • Matte finish • 600 Microns/23.6 Mils
• 45°/60° blade
Siser Romeo & Juliet:
Blade: 60°
Gram Force: 12-17
Offset: .250
Speed: 10
Blade: Standard
Cardstock Light+
Silhouette Cameo:
Blade: Standard, 10
Material: Heat Transfer, Flocked
Speed: 4
Force: 33
Scan N Cut:
Blade: Standard, 10
Cut Speed: 1
Cut Pressure: 2
Roland GS/GX-24:
Blade: 60° *
Gram Force: 150-190
Offset: .250
Speed: 30 cm/s
Blade: 60° *
Gram Force: 11-12
Tool: CB09U+0
Speed: 25 cm/s
MH, SC2. LP3, & Titan 1:
Blade: 45°/60°
Gram Force: 120-130
Speed: 300mm/s
*Blade Advancing Varies
Titan Series
Blade: 45°/60°
Gram Force: 100-110
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.* For Roland & Graphtec cutters, due to the material thickness, extend the blade out so that a significant amount of blade is exposed.
Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier cold
Application Instructions (heat press)
• Cut in Reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 311°F/155°C
• Use medium/firm pressure for 20 seconds
• Peel carrier cold
Brick 600 Applies to:
100% cotton
Poly/cotton blends
100% polyester
Recommended Accessories:
Siser Weeder
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on low dryer setting
Do not dry clean