Siser Easy Puff Metallic
Siser Easy Puff Metallic
Siser Easy Puff Metallic
Siser Easy Puff Metallic
Siser Easy Puff Metallic

Siser Easy Puff Metallic 11.8" Roll (Yard)

Product code: PUFF125012

Regular price $8.99
Shipping calculated at checkout.

Price per Yard
Quantity Unit Price
1 + $8.99
3 + $8.69
5 + $8.39
10 + $7.99
25 + $7.19
50 + $6.79

Easy Puff Metallic Heat Transfer Vinyl

Puff and shine that looks divine!

Featuring the same fun puffy effect as our standard Easy Puff, Easy Puff Metallic adds a new twist: a brilliant shiny finish! After heat applying, simply peel the carrier hot and heat press a second time to activate the puff. Designs will not only expand into 3D, but they'll also give off a beautiful gold or silver sheen! Perfect for big and bold artwork, Easy Puff Metallic has a unique look unlike anything you've seen before!

Easy™ Puff is CPSIA Certified so it's perfect for decorating children's clothing and accessories.

Siser Easy Puff Metallic

• PU Composition • 180 Microns/7.09 Mils

Important Application Notes:
• Easy Puff Metallic differs from our standard Easy Puff line and REQUIRES a 2-press application process. After the first press, the carrier must be peeled hot and the design should be covered with a cover sheet, then pressed a second time to activate the puff effect.

• Because achieving proper, firm pressure is key with Easy Puff, it is not recommended to apply this material with a home iron.

• Texture of applied material can vary from lightly textured to heavily textured.
Siser Romeo & Juliet:
Blade: 45°/60°
Gram Force: 10-20
Offset: .250
Speed: 10
Cricut Maker:
Blade: AutoBlade, Fine-Point
Setting: Heat Transfer (Non-Circut)
Brother Scan N Cut DX:
Blade: AutoBlade
 Cut Speed: 5
Half Cut: Auto
Silhouette Cameo 4:
Blade: AutoBlade, 3
Material: Heat Transfer, Smooth
Force: 6
Speed: 8
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 30-50 cm/s
Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 30 cm/s
US Cutter Titan 2 & 3:
Blade: 45°/60°
Gram Force: 80-85
Speed: 300 mm/s
*Blade Advancing Varies
Mimaki CG-60SR III
Blade: 45°
Gram Force: 80
Offset: 30
Speed: 20-30 cm/s
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
Application Instructions (home iron)
• It is not recommended to apply this material with a home iron.

Application Instructions (heat press)
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 280°F/138°C
• Use medium pressure for 10 seconds
• Peel carrier hot
• Use medium pressure for 10 additional seconds
• If areas of design lift after application, replace cover sheet and re-press for 5~10 seconds

Easy Puff Metallic Applies to:
100% cotton
Poly/cotton blends
100% polyester
Recommended Accessories:
Siser Weeder
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean