Siser Glitter Neon 19" x 12" Sheet (Clearance)
Siser Glitter Neon 19" x 12" Sheet (Clearance)
Siser Glitter Neon 19" x 12" Sheet (Clearance)
Siser Glitter Neon 19" x 12" Sheet (Clearance)
Siser Glitter Neon 19" x 12" Sheet (Clearance)
Siser Glitter Neon 19" x 12" Sheet (Clearance)
Siser Glitter Neon 19" x 12" Sheet (Clearance)

Siser Glitter Neon 19" x 12" Sheet (Clearance)

Product code: GLN19x12S

Regular price $4.39 Sale price $3.51 Save $0.88
/
Shipping calculated at checkout.

Price per Foot

Glitter Heat Transfer Vinyl

Attractive Designs with Eye Catching Sparkle!

Bling out plain designs for maximum appeal with the best Glitter HTV on the market! Available in over 30 vibrant colors, Glitter contains maximum sparkle without shedding any glitter flakes. Kids of all ages love the shimmer and pop. Glitter can be cut with laser systems.

Glitter is CPSIA Certified so it's perfect for decorating children's clothing and accessories.
Specifications:
PU composition
• Pressure sensitive backing • Glitter finish • 325 Microns/12.8 Mils
• 45°/60° blade • Do not layer
CUTTER SETTINGS
Cricut:
Blade: Standard
Setting: Iron-On +
Silhouette Cameo:
Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11
Scan N Cut:
Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5
Roland GS/GX-24:
Blade: 45°
Gram Force: 180-190
Offset: 250
Speed: 30 cm/s
Graphtec:
Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s
MH, SC2, LP3, Titan 1:
Blade: 45°/60°
Gram Force: 120-130
Speed: 300 mm/s
*Blade Advancing Varies
Titan 2 & 3
Blade: 45°/60°
Gram Force: 100-110
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm
Application Instructions (heat press)
• Cut in Reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm
RECOMMENDED ACCESSORIES & CARE
Glitter Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Recommended Accessories:
Siser Weeder
Laundering:
Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean