Siser Metal HTV
Siser Metal HTV
Siser Metal HTV
Siser Metal HTV
Siser Metal HTV
Siser Metal HTV
Siser Metal HTV
Siser Metal HTV
Siser Metal HTV
Siser Metal HTV

Siser Metal 19.66" x 12" Sheet

Product code: MR205004

Regular price $3.99
/
Shipping calculated at checkout.

Price per Foot
Quantity Unit Price
1 + $3.99
3 + $3.82
9 + $3.63
15 + $3.27
30 + $3.19
75 + $2.90
150 + $2.73

Metal Heat Transfer Vinyl

Metallic Foil Look with a Super Soft Feel!

Dazzle customers with this precious metal HTV! Available in silver and gold, Metal features show stopping shine with a smooth finish and soft hand that can be washed and worn without becoming lackluster. This fashion forward material is ideal for bridal parties, spirit wear, and any occasion that needs a touch of gleaming chrome! Due to Metal’s pressure sensitive carrier, you can use the Heat Press Weeding Trick (heating the platen and weeding the design on the heated surface) for smooth weeding! Metal can be cut with laser systems.

Metal is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories.
Siser Metal HTV
Specifications:
PET Composition
• Pressure sensitive backing • Brushed metal finish • 100 Microns/3.9 Mils
• 45°/60° blade • Top layer only
CUTTER SETTINGS
Siser Romeo & Juliet:
Blade: 45°/60°
Gram Force: 5-10
Offset: .250
Speed: 10
Cricut Explore Air:
Blade: AutoBlade, Standard
Setting: Vinyl +
Silhouette Cameo:
Blade: AutoBlade, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 6
Scan N Cut:
Blade: Standard, 2
Cut Speed: 5
Cut Pressure: 1
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 30-50 cm/s
Graphtec:
Blade: 45°
Gram Force: 9-10
Tool: CB09U+0
Speed: 30 cm/s
MH, SC2, LP3, Titan 1:
Blade: 45°/60°
Gram Force: 85-90
Speed: 300 mm/s
*Blade Advancing Varies
Titan 2 & 3
Blade: 45°/60°
Gram Force: 65-70
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier cold
Application Instructions (heat press)
• Cut in Reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use light/medium pressure for 10-15 seconds
• Peel carrier cold
RECOMMENDED ACCESSORIES & CARE
Metal Applies to:
100% cotton
Poly/cotton blends
100% polyester
Recommended Accessories:
Siser Weeder
Laundering:
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Hang item to dry
Do not dry clean