Siser StripFlock Pro HTV
Siser StripFlock Pro HTV
Siser StripFlock Pro HTV
Siser StripFlock Pro HTV
Siser StripFlock Pro HTV
Siser StripFlock Pro HTV
Siser StripFlock Pro HTV
Siser StripFlock Pro HTV

Siser StripFlock Pro 14.75" x 12" Sheet

Product code: SFP15P5002

Regular price $4.50
Shipping calculated at checkout.

Price per Foot
Quantity Unit Price
1 + $4.50
3 + $4.41
9 + $4.19
15 + $3.87
30 + $3.52
75 + $3.28
150 + $3.10

StripFlock® Pro Heat Transfer Vinyl

The Only Flock in the Industry that can be Layered on Itself!

A great alternative to embroidery, StripFlock Pro heat transfer vinyl gives logos a raised, textured, suede-like feel. The deep, opaque colors make StripFlock Pro excellent for retro designs or anytime you want a rich look. StripFlock Pro looks excellent on caps, bags, and garments that need textured visual interest. Use Stripflock Pro as a base layer and cover with other materials or more StripFlock! The ability to layer this material allows you to say “yes” to multi-color designs.

StripFlock Pro is CPSIA Certified so you can decorate kids' items with confidence.
Siser StripFlock Pro HTV
PVC composition
• Pressure sensitive backing • Suede-like finish • 410 Microns/16.1 Mils
• 45°/60° blade
Can be layered

Siser Romeo & Juliet:
Blade: 45°/60°
Gram Force: 20-25 (45°) / 15-20 (60°)
Offset: .250
Speed: 10
Cricut Explore Air:
Blade: AutoBlade, Standard
Setting: Iron On
Silhouette Cameo:
Blade: Standard, 4
Material: Heat Transfer, Flocked
Material: Smooth
Speed: 5
Force: 6
Scan N Cut:
Blade: Standard, 4
Cut Speed: 5
Cut Pressure: 2
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-120
Offset: .250
Speed: 30 cm/s
Blade: 45°
Gram Force: 10
Tool: CB09U+0
Speed: 30 cm/s
Titan 2 & 3
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies
Scan N Cut DX:
Blade: AutoBlade
Cut Speed: 5
Half Cut: 4
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm
Application Instructions (heat press)
• Cut in Reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 310°F/155°C
• Use light/medium pressure for 15 seconds
• Peel carrier warm (at least 10 seconds off press)
StripFlock Pro Applies to:
100% cotton
Poly/cotton blends
100% polyester
Recommended Accessories:
Siser Weeder
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean