Uninet DTF 4300 Direct to Film Printer
Uninet equipment from your Buena Park supplier
Say “high” to the UNINET® DTF™ 4300 Transfer Printer. High volume.
🎨 3 options
🔥 Overview
About this product
High Speed. High Efficiency. The UNINET DTF 4300 is a 17” wide roll feed printing Direct to Film printer, designed to produce durable and intense color DTF transfers. Built from the ground up as a professional, industrial grade DTF printer, it boasts a professionally enhanced DUAL printhead system, utilizing robust and reliable printheads.
Print speeds are over 40 sq ft / hr, fits through a standard 32” doorway and runs on a regular 110v outlet. Printer may be purchased alone, or choose between either a ‘Horizonal’ shaker or “Vertical‘ SLIMSHAKER’ In-line, automated powder application and curing machines.
Both require a dedicated 220v line installed by a professional.
✨ Features
Features
- Accepts DTF™ rolls up to 17” wide.
- Vacuum-enhanced printing area for better ink adhesion and avoidance of film buckling.
- WICS (White Ink Circulation System) to minimize clogging.
- Two high-definition industrial-grade inkjet Printheads.
- Continuous XL Ink Tank Feed System.
- Humidity Sensor.
- Driver Software.
- Optional full automation capable when bundled with a shaker.
📦 What's included
Includes
- UNINET® DTF™ Advanced RIP Software features exceptional file preparation, white and color management, production automation functionality, and more. (Built-in Ethernet Port on PC is Required).
- 2-hour virtual onboarding (soon to be replaced or enhanced with the UNINET® DTF™ Master Class Video Training Series).
- UNINET® DTF™ Five-color Inks- 1000 ml bottles.
- UNINET® DTF™ Transfer Powder 2x 1.75 ml bottles.
- UNINET® DTF™ Transfer Film Roll – 328 Ft Roll.
- UNINET® DTF™ Starter Bundle (Hygrometer, Maintenance Solutions and Accessories).
- World Class Service and Support direct from UNINET®.
- UNINET® USA 12-month warranty.
🧰 You will also need
What's not included but you may need
- Windows® 10 or higher computer (PC) with an available Ethernet port. If a network port is not available, a separate USB gigabit ethernet adapter will need to be purchased.
- Heat press for finishing (curing) the final print - We recommend a 16”x 20” heat press.
- A humidifier (to keep the humidity above 40% in the print room) is recommended.
- Five small funnels (for ink filling).
- Personal Training and Technical Support*.
- Protective gear.
- Air purifier/fume extractors and ventilators are used for the curing process.
- APPLICATION INSTRUCTIONS (Using UNINET Triple Coated, Cold Peel Film and UNINET inks)
📌 Details
When using the heat station (manual process)
- After you print, you must apply the adhesive power within a few minutes (before the ink dries). Manual application of the powder would normally a require large container, spreading the powder all over the page, and then removing as much excess powder as possible by ‘flicking’ the back of the sheet.
- Then lay the print in the heat station, print side face up.
📌 Details
Recommended temperature for DTF powder curing
- A3 sheets – 120°C / 250°F for 120 seconds. For sheets with large images and / or a lot of ink coverage, it may be necessary to open the cover, rotate the page 180 degrees, and then bake again for another 2 mins.
- A4 or smaller sheets - 120°C / 250°F for 120 seconds
🔥 How to use
Application to substrate
• Recommended Heat Press Pressure: Medium or 60 lbs of pressure
• Place or thread your garment on the press. Position the transfer sheet (print side down) onto the garment. Cover the transfer sheet and garment with kraft paper and close the press, using the following suggestions: COTTONS and BLENDS: • Press at 300 - 325°F for 10 – 12 seconds • Post press for 5 – 10 seconds *Hoodies may require 325°F and up POLYESTERS / TRI-BLENDS: • 265 – 275°F for 8 – 10 seconds • Post press for 5 – 10 seconds * Thinner material may require lighter pressure; otherwise the transfer can leave a ‘window’ on the garment and/or scorching may occur. *Polyester settings can vary, but best to use lower temperature and pressure generally
50 / 50: • 275°F for 12 seconds • Post press for 5 – 10 seconds
COTTON: • 310 - 325°F for 15 seconds • Post press for 10 seconds FINISHING: • Matte finish – Kraft paper, T Seal or parchment cover sheet. • Shiny/gloss finish - Teflon cover sheet *Specialty silicone pads with texture can be used to prevent gloss look, gives print a nice textured feel. ADDITIONAL SUGGESTIONS: • Thicker fabrics require more heat, generally. • Hats (poly) may require 245 - 250°F for 5 - 8 seconds • Umbrellas, EZ-ups, stadium chairs will require testing and trial and error. *Be careful of dye / ink migration with polyester textiles - perform a 24hr test (fine tuning) to see if the ink migrates (clothing dye reacts with the DTF ink) GARMENT TYPES: • DTF works with almost all fabrics and garment types: • Combed Cotton, Ring Spun Cotton, Organic Cotton, Polyesters, Blended Fabrics, Poly-Cottons, Tri-Blends, Polyester-Spandex, Leather, Vinyl, Denim, Canvas and much more.
📋 Specifications
Technical specifications
- PRINT SPEED: up to 44 - 50 square ft / hr (~20 A2 pages/hr)
- RESOLUTION: Up to 1440 dpi
- PRINTHEAD: Dual system
- OPERATING SYSTEM SUPPORTED: Windows® 10 & Windows® 11
- INTERFACES: Ethernet Port
- PAPER CAPACITY: 328 ft transfer film roll: 17 inch wide
- FILM ROLL SIZE (MIN / MAX): 17 inches
- DIMENSIONS (WxDxH) (Printer Only): Uncrated - 53” x 35” x 53” - Crated – 67” x 32” x 23”
- WEIGHT: Uncrated - 286lbs / 130kg - Crated: 375lbs / 170kg
🎬 Watch
See it in action
Ready to order?
Choose your option above and add it to your cart.
On qualifying orders.
Order by 3 PM PT.
Buena Park, CA.
💬 Contact
Questions about this product?
Our Buena Park team is happy to help with sizing, compatibility, and orders.
↩️ Final Sale. Returns not available.
🏷️ This product is excluded from all promotional discounts and offers.
ℹ️ This item may require an additional shipping fee. Contact us for more details.
